Match of Sherwin Williams™ SW1056 Baronial Brown *

A match of Sherwin Williams SW1056 Baronial Brown is a color reference within the Sherwin Williams palette. When you order it from MyPerfectColor, you are ordering MyPerfectColor paint matched to SW1056 Baronial Brown, not Sherwin Williams's original paint product.

That is the right choice if you need a repeatable match for parts, fixtures, trim pieces, pipes, grilles, or other items that need to coordinate with that color reference.

Choose the finish based on how the item will be used and how much sheen you want on the finished piece. A flatter finish usually hides surface texture and small flaws better, while satin or semi-gloss is easier to clean and can hold up better on handled or exposed parts. Gloss finishes are the most reflective and can make the matched color read a little differently on the final surface.

If you are coating a visible fixture, hardware piece, vent, or trim part, think about durability, cleanup, and how much light the surface will reflect before you order a match of Sherwin Williams SW1056 Baronial Brown in a specific finish.

Primer depends on the substrate, the condition of the surface, and the paint type you are using. A primer can improve adhesion and hide, and it often helps on bare, repaired, porous, glossy, or otherwise difficult surfaces. On an existing coating that is sound and compatible, a primer may not always be required.

If you are unsure, use primer and check the product prep guidance for the format you ordered. For SW1056 Baronial Brown, a test application on the actual surface is the safest way to confirm adhesion and appearance.

Use light, even coats and keep your passes consistent so the color builds gradually. Overlap each pass slightly and avoid heavy wet coats, since too much paint at once can cause runs, uneven sheen, or a muddy-looking finish. Let each coat dry according to the product directions before applying the next one.

This approach matters on items like vents, speaker grilles, switch covers, brackets, and other small parts where uneven spray build is easy to see. A controlled spray pattern usually gives a cleaner match of SW1056 Baronial Brown on the finished item.

Plan by measuring the total surface area, the texture of the substrate, the hiding power you need, the application method, and how many coats you expect to apply. A typical can of spray paint covers about 20 square feet with one coat. Other paint formats typically cover about 400 to 600 square feet per gallon, but actual yield can vary widely.

If the surface is rough, porous, or a strong color change is involved, order extra so you do not run short before the job is complete. That is especially useful for SW1056 Baronial Brown on parts that may need a second pass for even coverage.

Yes, but plastics vary widely, so testing on the actual material is important. MyPerfectColor spray paint sticks well to most plastics, but low-energy or slick plastics can benefit from the MyPerfectColor primer to improve adhesion. A quick test on a hidden area is the best way to confirm compatibility before you coat the full part.

For plastic trim, covers, housings, or accessories, clean the surface well and follow the prep steps for the format you ordered. That reduces the risk of peeling, fisheyes, or poor adhesion when applying SW1056 Baronial Brown.

MyPerfectColor has an original sample of the Sherwin Williams SW1056 Baronial Brown in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW1056 Baronial Brown. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW1056 Baronial Brown, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.