Match of Sherwin Williams™ SW2090 Yuma Green *

Apply SW2090 Yuma Green in several light, even coats instead of one heavy pass. Keep a consistent spray distance, overlap each pass slightly, and move at a steady pace so the finish builds gradually. Heavy coats can cause runs, a muddy color build, or uneven sheen.

If you are spraying a small part with edges, curves, or recesses, it is usually better to build coverage slowly and let each coat flash per the product directions before the next coat.

The SDS is tied to the specific MyPerfectColor paint product and chemistry, not to the SW2090 Yuma Green color name alone. To get the right safety information, look up the SDS for the exact MyPerfectColor product you plan to order.

For SW2090 Yuma Green, use the MyPerfectColor Safety Data Sheets page for the product rather than relying on the color reference by itself.

Start by cleaning the surface so dust, grease, and loose residue do not interfere with adhesion. Degrease when needed, and lightly scuff the surface where appropriate so the coating can grip better.

Mask off nearby areas you do not want coated, and test SW2090 Yuma Green on the actual surface before you paint the full item. That is especially useful on plastic, metal, or previously coated parts where prep needs can vary.

Coverage depends on the surface size, texture, hiding power, application method, and how many coats you need. A typical can of spray paint covers about 20 square feet with one coat. Other paints typically cover about 400 to 600 square feet, but rough, porous, or dark surfaces may need more material.

If you are coating a small part like a vent, grille, pipe, fixture, or hardware piece, plan for enough product to cover the item fully and allow for test sprays and additional coats if needed.

Not always. Lighting, sheen, placement, and nearby surfaces can all change how SW2090 Yuma Green reads after application. A match can be correct and still look different on a glossy surface versus a matte one, or in direct light versus shade.

If the item will sit next to an existing painted surface, test the MyPerfectColor match on the actual substrate and view it in the final location before coating the entire piece.

MyPerfectColor has an original sample of the Sherwin Williams SW2090 Yuma Green in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW2090 Yuma Green. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW2090 Yuma Green, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.