Match of Sherwin Williams™ SW1691 Jazzy *

Use light, even coats and keep the spray can moving so you do not build up wet paint in one spot. Hold a consistent distance from the surface and overlap each pass slightly. Heavy passes can cause runs, uneven sheen, or a muddy-looking build, especially with a vivid color like SW1691 Jazzy.

Plan on letting each coat flash before applying the next one, and follow the dry and recoat times on the specific MyPerfectColor product label. If the first coat does not fully cover, build the color gradually instead of trying to cover it all at once.

The SDS is tied to the MyPerfectColor product and its chemistry, not to the color name alone. If you order a MyPerfectColor match of SW1691 Jazzy, use the Safety Data Sheet for that exact MyPerfectColor product and format.

MyPerfectColor Safety Data Sheets are available on the Safety Data Sheets page. If you are comparing products or finishes, make sure you are looking at the SDS for the exact item you plan to spray.

Clean the surface first so dust, grease, and other contamination do not interfere with adhesion. On bare metal, remove rust and corrosion before painting. On an existing coating, scuff the surface so the new paint has a better mechanical bond.

The condition of the old coating matters. If it is peeling, chalky, or unstable, it should be addressed before you spray a match of SW1691 Jazzy. Also keep in mind that the old finish, texture, and gloss level can affect how the final coating looks once applied.

Yes. Finish is a practical coating variable, not just a style choice. Higher gloss reflects more light and can make a match of SW1691 Jazzy look brighter or more reflective, while a flatter finish reduces reflection and can make the color read differently on the painted item.

If you need the result to coordinate with an existing coated part, use the same or a very similar finish whenever possible. Different sheen levels can make the same color formula appear different even when the color match is correct.

Yes, but plastics vary widely, so test on the actual material before committing to the full project. MyPerfectColor spray paint sticks well to most plastics, but low-energy or slick surfaces may need extra prep to improve adhesion.

Using the MyPerfectColor primer can help on difficult substrates. If the plastic is flexible, molded, or unusually smooth, clean it well, prepare it carefully, and test a small area first so you can verify adhesion and appearance before spraying the full piece.

MyPerfectColor has an original sample of the Sherwin Williams SW1691 Jazzy in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW1691 Jazzy. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW1691 Jazzy, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.