Match of Sherwin Williams™ SW1116 Vellum *

Primer depends on the surface, its condition, and the product type you are using. For SW1116 Vellum, primer is often helpful on bare, repaired, glossy, slick, or uneven substrates because it can improve adhesion and help the color apply more evenly.

If you are painting a small part or hardware item, check the prep guidance for the selected MyPerfectColor format before ordering. A primer usually does not hurt, but it is not always required.

Coverage for SW1116 Vellum depends on the surface area, texture, hiding power, application method, and how many coats you need. A typical can of spray paint covers about 20 square feet with one coat. Other paints typically cover between 400 and 600 square feet, but real coverage can be lower on rough or porous surfaces.

Because SW1116 Vellum is a light color, darker or uneven substrates may need more coats for even coverage. If you are coating multiple parts, it is safer to plan a little extra rather than order too little.

Yes. SW1116 Vellum in MyPerfectColor custom spray paint is a practical option for small parts and hardware such as switch covers, vents, speaker grilles, knobs, brackets, trim pieces, and similar items when a smooth sprayed finish is desired.

For best results, clean the part, remove loose coating, and use primer if the substrate or condition calls for it. This is especially important on plastic, metal, or previously coated items where adhesion can vary.

No. The same matched SW1116 Vellum color can look different in matte, satin, semi-gloss, or gloss because the finish changes how light reflects from the surface.

If your project is going next to an existing painted item, the finish can matter as much as the color match. A test spray on the actual substrate is a good way to check how SW1116 Vellum will read after application.

Choose the sheen for SW1116 Vellum based on the part's use and the look you need after application. Lower sheen usually means less reflection, while higher sheen often makes cleaning easier and can add durability, but it also changes how the matched color reads.

If the item will sit near an existing surface, try to match the surrounding sheen as closely as possible. If you are ordering MyPerfectColor paint matched to SW1116 Vellum for a removable part, choose the finish that fits the part's wear and cleanup needs first.

MyPerfectColor has an original sample of the Sherwin Williams SW1116 Vellum in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW1116 Vellum. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW1116 Vellum, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.