Match of Sherwin Williams™ SW6617 Blushing *

Use light, even coats and keep the can moving at a consistent distance from the surface. Overlap passes slightly so the match of SW6617 Blushing builds evenly, and avoid trying to cover in one heavy coat. Heavy passes can cause runs, uneven sheen, or a muddy color build.

For small parts, fixtures, trim pieces, or removable items, spray from several angles and let each coat flash before adding the next one. If the surface starts to look wet or heavy, stop and let it level out before continuing.

Not always. Even when MyPerfectColor makes a match of SW6617 Blushing, the finished look can shift based on lighting, sheen, surface texture, and the color of nearby surfaces. A sprayed part can also read a little differently than the original swatch or an older painted item.

If the part will sit next to an existing painted surface, check the match on the actual item in its final location before finishing the whole project. That is the safest way to judge how SW6617 Blushing will read after application.

Coverage depends on the surface size, texture, hiding power, application method, and how many coats you need. A typical can of spray paint covers about 20 square feet with one coat. Other paint formats typically cover between 400 and 600 square feet, but real coverage can be lower on rough or porous surfaces.

If you are painting small parts, hardware, vents, or other detailed items in SW6617 Blushing, plan for extra material if the surface is textured or if you expect to apply more than one coat. When in doubt, size the order to the full area plus some margin for application loss and second coats.

Yes, but plastics vary a lot, so testing on the actual material is important. MyPerfectColor spray paint sticks well to most plastics, but the MyPerfectColor primer can help improve adhesion on difficult or low-energy surfaces. That matters for items like PVC pipe, vents, grilles, covers, or other molded parts.

Clean the part well, test a small area first, and use the primer if the plastic is smooth or known to be hard to coat. That is the best way to reduce the risk of peeling, fisheyes, or weak adhesion on a match of SW6617 Blushing.

The SDS is tied to the MyPerfectColor paint product and chemistry, not to the SW6617 Blushing color name alone. If you need safety information, check the MyPerfectColor Safety Data Sheets page for the specific product or format you are ordering.

If you are comparing spray paint, another paint format, or a different chemistry, use the SDS for that exact MyPerfectColor product so you are reviewing the correct safety and handling information.

MyPerfectColor has an original sample of the Sherwin Williams SW6617 Blushing in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW6617 Blushing. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW6617 Blushing, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.