Match of Sherwin Williams™ SW6743 Mint Condition *

Confirm SW6743 Mint Condition from a physical swatch or another known existing color reference from Sherwin Williams, not from a screen alone. MyPerfectColor matches the original brand color standard, so the key decision is making sure the target reference is correct before you place the order.

If you are matching an existing painted item, verify that the item itself is the reference you want to reproduce and not an aged or discolored surface.

Estimate the total area first, then plan for the surface texture, hiding power, application method, and how many coats you expect to apply. A typical can of spray paint covers about 20 square feet with one coat. Other paint formats usually cover about 400 to 600 square feet per coat, but the exact amount for a match of Sherwin Williams SW6743 Mint Condition depends on the substrate and the finish of the surface you are coating.

If the item is textured, porous, dark, or irregular, it is wise to allow extra paint for coverage and touch-up during the project.

No finish reads exactly the same in every setting. After a match of Sherwin Williams SW6743 Mint Condition is applied, daylight, warm indoor bulbs, nearby colors, placement, and sheen can all change how the color appears on the finished item.

If the part will be seen beside other painted surfaces, check it in the actual location and lighting conditions where it will be used.

Choose the finish based on how the item will be used, cleaned, and viewed. Lower-sheen finishes reduce reflection and can make surface texture less noticeable, while satin and gloss finishes are easier to clean and usually show more reflectivity.

For a match of Sherwin Williams SW6743 Mint Condition, remember that sheen also changes how the color reads on the finished item. If the part must coordinate with a nearby painted surface, use the same sheen whenever possible to reduce appearance differences.

Yes, but plastics vary a lot, so prep matters. MyPerfectColor spray paint sticks well to most plastics, but some low-energy or hard-to-bond plastics may need more preparation. Testing on the actual part is the safest way to confirm adhesion before painting the full item.

For difficult plastic surfaces, use the MyPerfectColor primer for acrylic enamel to improve adhesion when needed, and make sure the part is clean and properly prepared before applying a match of Sherwin Williams SW6743 Mint Condition.

MyPerfectColor has an original sample of the Sherwin Williams SW6743 Mint Condition in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW6743 Mint Condition. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW6743 Mint Condition, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.