Match of Sherwin Williams™ SW6300 Burgundy *

Yes, but prep matters. For metal, clean off dirt, grease, wax, and loose rust before applying MyPerfectColor paint matched to SW6300 Burgundy. If the part already has an old coating, lightly scuff the surface so the new paint can bond better. The condition of the existing finish can change the final result, especially if it is glossy, uneven, or peeling.

Do a test spray on the actual item when possible. That helps you see how SW6300 Burgundy reads on that specific metal, texture, and old coating before you paint the full part.

Coverage depends on the size of the item, the surface texture, the hiding power needed, the spray method, and how many coats you plan to apply. A typical can of spray paint covers about 20 square feet with one coat. Other paint formats commonly cover about 400 to 600 square feet, but the exact amount varies by product and application.

If you are coating a textured or dark surface, plan for more paint than you would for a smooth, light surface. For MyPerfectColor paint matched to SW6300 Burgundy, it is safer to estimate based on the actual part and then add extra for a second coat or for touch-up on edges and hard-to-reach areas.

Plastics vary widely, so it is important to test MyPerfectColor paint matched to SW6300 Burgundy on the actual plastic before committing to the full project. MyPerfectColor spray paint adheres well to most plastics, but adhesion can improve when you use the MyPerfectColor primer for Acrylic Enamel first.

Clean the plastic carefully and make sure it is dry before spraying. If the plastic has a smooth or low-energy surface, a primer and a small test area can reduce the risk of poor adhesion or an unexpected finish change.

The SDS is tied to the MyPerfectColor product chemistry, not to the SW6300 Burgundy color name alone. To find the correct safety information, use the SDS for the specific MyPerfectColor paint product you plan to order.

If you need the safety data for a MyPerfectColor match of SW6300 Burgundy, check the MyPerfectColor Safety Data Sheets for the exact product format and chemistry you are buying.

Use light, even coats and keep the can moving so the paint does not build up too heavily in one spot. Hold a consistent spray distance, overlap each pass slightly, and avoid heavy passes that can cause runs, uneven sheen, or a muddy color build.

For a custom match of SW6300 Burgundy, a few controlled coats usually give a better result than trying to cover in one heavy pass. Let each coat flash off as needed before applying the next one.

MyPerfectColor has an original sample of the Sherwin Williams SW6300 Burgundy in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW6300 Burgundy. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW6300 Burgundy, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.