Match of Sherwin Williams™ SW6805 Glass Bead *

For spray application, dry to touch is usually within minutes, but that is not the same as being ready for recoating or handling. Plan on recoating in about one to two hours, and allow about two weeks for full cure before heavy use or handling.

If you move too fast between coats or handle the part too early, you can mark the finish or slow the cure. Treat each stage as a separate milestone when planning SW6805 Glass Bead on your project.

Before you order SW6805 Glass Bead, confirm the Sherwin Williams color reference, the MyPerfectColor product type, the sheen, and the quantity you need. Those choices matter because you are ordering a custom-matched product, not the original Sherwin Williams paint.

Custom-made color matches are not returnable or refundable, so it is important to check the color reference and the order details carefully before purchase.

Yes. Finish changes reflectivity, and that can change how SW6805 Glass Bead reads after it is applied. The same color can look different on a glossy surface than it does on a lower-sheen surface because the coating reflects light differently.

When you choose a finish, treat it as part of the coating specification for the item you are painting. For a match of SW6805 Glass Bead, the finish is a practical ordering choice, not just a visual preference.

Yes, but surface prep matters. Clean the part first to remove dust, grease, and other contamination. If the surface is smooth, scuff it so the new coating has a better chance to bond, and address rust or failing old paint before you spray.

The gloss, texture, and condition of the existing coating can affect the final appearance of a match of SW6805 Glass Bead. If the substrate is questionable, a small test area is a practical way to reduce risk before finishing the full part.

The SDS is tied to the specific MyPerfectColor product and its chemistry, not to the Sherwin Williams color name alone. To get the correct document, look for the Safety Data Sheet for the exact MyPerfectColor paint format you plan to order.

If you are comparing product options, make sure the SDS matches the same product type you intend to use for SW6805 Glass Bead. Do not assume one SDS covers every format just because the color reference is the same.

MyPerfectColor has an original sample of the Sherwin Williams SW6805 Glass Bead in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW6805 Glass Bead. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW6805 Glass Bead, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.