Match of Sherwin Williams™ SW7009 Pearly White *

Yes. A match of Sherwin Williams SW7009 Pearly White can be ordered as MyPerfectColor custom spray paint matched to the selected Sherwin Williams color. This format is practical for baskets, frames, shelving, decor pieces, hardware, and other small or awkward items where spray application is easier than brushing. If the part will be handled often or mounted next to other finished pieces, make sure the substrate is prepped well so the color lays down evenly.

Start by cleaning off dust, grease, and any loose contamination. If the metal is bare, rusty, or failing, remove what is loose and use the proper primer or prep for that substrate before applying a match of SW7009 Pearly White. If you are coating an existing painted surface, scuff a sound glossy finish so the new film can bond. The old coating's gloss, texture, and condition can affect how SW7009 Pearly White looks after it dries, so a test spray is smart when the finish is important.

Choose the sheen based on how the item will be used, because sheen changes both durability and the way SW7009 Pearly White reads after application. Higher gloss finishes usually clean more easily and reflect more light, while flatter finishes hide small surface flaws better and reduce reflectivity. The same color match can look different from one sheen to another, so match the finish to the project rather than assuming one sheen will suit every surface.

Not always. Even when MyPerfectColor makes a match of SW7009 Pearly White, the finished appearance can shift with lighting, placement, nearby surfaces, texture, and sheen. A part viewed outdoors, under LEDs, or beside an older painted area may read differently from a swatch or from the original reference. If the item sits next to an existing surface and color acceptance matters, a test spray on the actual substrate is the safest way to check the result.

A typical can of spray paint covers about 20 square feet with one coat, but actual coverage depends on the size of the item, surface texture, hiding power, application method, and how many coats are needed. Rough, porous, dark, or uneven surfaces usually use more material than a smooth, light, uniform surface. If you are painting multiple parts or want extra material for full coverage and setup loss, plan with some margin instead of ordering right at the minimum.

MyPerfectColor has an original sample of the Sherwin Williams SW7009 Pearly White in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW7009 Pearly White. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW7009 Pearly White, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.