Match of Sherwin Williams™ SW2345 Biltmore Buff *

Confirm SW2345 Biltmore Buff from a physical Sherwin Williams swatch, a labeled sample, or a known existing painted item before you order. Screen images can shift with lighting and display settings, and MyPerfectColor matches to the selected brand color reference, not to what a monitor shows.

If the item you are matching is already aged or weathered, verify whether you want the original color reference or the current worn look, since those are not always the same.

Coverage depends on the surface area, texture, hiding power, application method, and how many coats MyPerfectColor SW2345 Biltmore Buff needs. A typical can of spray paint covers about 20 square feet with one coat, while other paint formats often cover about 400 to 600 square feet per gallon.

If the surface is rough, porous, dark, or uneven, plan for more material and a test sample before ordering the full amount.

For a better result with SW2345 Biltmore Buff, clean the surface, remove grease and dust, and lightly scuff it when the substrate allows. Mask off adjacent areas you do not want coated, then test the match on the actual surface before committing to the full project.

Good prep matters on metal, plastic, wood, and previously coated parts because surface condition can affect adhesion and how the color reads after drying.

Apply SW2345 Biltmore Buff in light, even coats rather than one heavy pass. Keep the can moving, hold a consistent distance from the surface, and overlap each pass slightly so the coating builds evenly.

Heavy passes can cause runs, uneven sheen, or a muddy color build, especially on small parts, trim pieces, grilles, and fixtures.

Finish changes how SW2345 Biltmore Buff reflects light, so the same color can look different after it is applied. A glossier coating will usually reflect more light, while a flatter finish will look less reflective, and that can change the perceived color on the finished item.

When you order, treat finish as a practical coating choice, not just an appearance preference, and make sure the finish matches the needs of the part you are coating.

MyPerfectColor has an original sample of the Sherwin Williams SW2345 Biltmore Buff in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW2345 Biltmore Buff. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW2345 Biltmore Buff, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.