Match of Benjamin Moore™ HC-5 Weston Flax *

Yes, but plastic substrates vary a lot, so test the MyPerfectColor match of HC-5 Weston Flax on the actual part before finishing the full project. MyPerfectColor spray paint adheres well to most plastics, and using the MyPerfectColor primer can improve adhesion on difficult surfaces.

This matters for items like vents, grilles, covers, pipe trim, hardware, and other removable parts because the same HC-5 Weston Flax color can behave differently on different plastics. If the part is a low-energy plastic or has an unknown finish, prep and testing are the safest way to avoid adhesion problems.

Not always. Even when the match is correct, HC-5 Weston Flax can read differently after application because lighting, sheen, surface texture, placement, and nearby materials all affect how the finished item looks.

This is especially important when the painted part will sit next to an existing painted surface or be viewed under changing light. MyPerfectColor makes a match of HC-5 Weston Flax, but the final appearance still depends on the item, the prep, and the finish used.

The SDS is tied to the MyPerfectColor product and chemistry, not to the HC-5 Weston Flax color name alone. To find it, use the MyPerfectColor Safety Data Sheets page for the specific paint format you are ordering.

If you are comparing products, make sure you are looking at the SDS for the MyPerfectColor paint matched to HC-5 Weston Flax, not the Benjamin Moore color reference itself.

For MyPerfectColor spray paint matched to HC-5 Weston Flax, dry-to-touch is typically within minutes, recoating is usually recommended in 1 to 2 hours, and full cure takes about two weeks.

Those are different stages. Dry-to-touch means the surface is no longer wet, but it is not yet fully cured. If you need to handle the part or stack pieces, plan for extra time so the HC-5 Weston Flax finish is not damaged between coats or before full cure.

Coverage depends on the surface size, texture, hiding power, application method, and how many coats the HC-5 Weston Flax project needs. A typical can of spray paint covers about 20 square feet with one coat.

For rough, porous, detailed, or oddly shaped parts, plan for less effective coverage than a smooth flat surface. If you are painting items like pipe, fixtures, grilles, brackets, or small accessories, it is usually safer to allow for more than one coat when estimating how much HC-5 Weston Flax paint to order.

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore HC-5 Weston Flax enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.

While we can provide Benjamin Moore HC-5 Weston Flax in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.