Match of Benjamin Moore™ 737 Sonoma Skies *

Coverage depends on the size of the item, surface texture, hiding power, application method, and how many coats you need. A typical can of spray paint covers about 20 square feet with one coat, but rough or porous surfaces will use more paint than smooth ones.

For 737 Sonoma Skies, plan on measuring the actual parts you are painting, then allow extra for test spraying and a second coat if the substrate shows through. This is especially important on items like PVC pipe, vents, hardware, railings, or other small parts where the shape and edges can increase paint use.

The best finish depends on how the item will be used and how much reflectivity you want. Higher gloss finishes are usually easier to clean and more durable, but they also make the matched color look brighter and more reflective. Flatter finishes reduce shine and can hide small surface flaws more easily.

With 737 Sonoma Skies, the sheen you choose can change the way the color reads on the finished part. If you are coating trim pieces, fixtures, or hardware, choose the finish that fits the use of the item and the look of the surrounding surface, not just the color name itself.

Spray paint is usually dry to the touch within minutes, but dry to touch is not the same as ready for recoating or full handling. In most cases, you should wait 1 to 2 hours before recoating and allow about 2 weeks for full cure.

For 737 Sonoma Skies, avoid heavy handling, stacking, or installation stress until the coating has fully cured. If you are painting small parts like grilles, covers, or fixtures, give each coat enough time so the finish can build evenly without trapping solvent.

A correct match of 737 Sonoma Skies can still look different after application because lighting, sheen, texture, and nearby surfaces all affect appearance. The same color may read a little differently indoors versus outdoors, or next to an older painted part that has aged over time.

If the finished item will sit beside an existing surface, test on the actual substrate and view it in the same lighting where it will be used. That is the most practical way to judge how a match of 737 Sonoma Skies will look on the final part.

Yes, MyPerfectColor spray paint matched to 737 Sonoma Skies can be used on many plastic parts, but plastics vary widely and surface preparation matters. Some plastics need different prep or a primer to improve adhesion, so testing on the actual material is important before you paint the full item.

For PVC pipe, vents, grilles, access panels, or similar parts, use the MyPerfectColor primer to help improve adhesion when needed. A test application on the real substrate is the best way to reduce the risk of peeling, poor bonding, or uneven color holdout.

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore 737 Sonoma Skies enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.

While we can provide Benjamin Moore 737 Sonoma Skies in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.