Match of Benjamin Moore™ 727 Calypso Blue *

Yes, but plastics vary a lot, so 727 Calypso Blue should be tested on the actual item before you commit to the full project. MyPerfectColor custom spray paint matched to 727 Calypso Blue can work well on many plastics, but adhesion can change based on the plastic type, surface texture, and any release agents or old coatings on the part.

For better adhesion, use the MyPerfectColor primer for Acrylic Enamel before spraying 727 Calypso Blue. Clean the surface well, let it dry, and make a small test area first so you can confirm both adhesion and appearance on that specific plastic.

The finish affects how 727 Calypso Blue reads on the final surface, so choose sheen based on the part's use and the look you need. Higher gloss usually reflects more light and can make the color look a bit deeper and more noticeable, while lower gloss reduces reflection and can make the same match appear softer.

If the item will be handled, wiped down, or exposed to wear, choose the most durable finish available for the format you are ordering. If you are matching another coated part, the existing sheen matters as much as the color itself, so try to keep the new finish close to the surrounding surface.

Yes. MyPerfectColor custom spray paint matched to 727 Calypso Blue is a practical choice for small parts and hardware where you want a smooth, durable sprayed finish. It is often a better fit than brush application for items like switch covers, knobs, vents, speaker grilles, brackets, trim pieces, and similar removable parts.

For the best result, remove the part if you can, clean it thoroughly, and use primer when the substrate needs it. Small parts show surface defects easily, so a test spray on one piece or on the backside can help you confirm the color and coverage before spraying the visible side.

Coverage depends on the size of the item, the texture of the surface, how well the color hides, and how many coats you need. As a general planning guide, one can of spray paint typically covers about 20 square feet with one coat, but rough, porous, or dark surfaces can use more paint.

If you are coating a part in 727 Calypso Blue that has edges, grooves, or a strong color underneath, plan for extra material so you do not run short before the finish looks even. For larger projects or multiple parts, count the coats first and then estimate from the total area rather than relying on the part size alone.

Before applying 727 Calypso Blue to metal or a painted surface, clean off dust, grease, wax, and any contamination that could interfere with adhesion. If the metal is rusty, remove the rust first, and if the old coating is glossy or smooth, scuff it so the new paint has a better mechanical bond.

The condition of the existing coating matters because gloss, texture, peeling, and wear can all change how 727 Calypso Blue looks after it is sprayed. If the old finish is failing or unknown, test a small area first or stabilize the surface before painting the full part.

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore 727 Calypso Blue enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.

While we can provide Benjamin Moore 727 Calypso Blue in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.