Match of Benjamin Moore™ 673 Iced Green *

Coverage for Benjamin Moore 673 Iced Green depends on the surface size, texture, the color underneath, application method, and how many coats you need. A typical can of spray paint covers about 20 square feet with one coat. Smoother, lighter, and smaller parts may need less; rough, porous, or darker surfaces usually need more. If you are ordering a MyPerfectColor match of 673 Iced Green for trim pieces, fixtures, or removable parts, measure the actual paintable area and plan extra for test spraying and second coats.

The Safety Data Sheet for Benjamin Moore 673 Iced Green is tied to the MyPerfectColor product chemistry, not the color name by itself. If you are ordering a MyPerfectColor paint matched to 673 Iced Green, use the SDS for the exact product format you plan to buy. MyPerfectColor Safety Data Sheets can be found at https://www.myperfectcolor.com/Safety-Data-Sheets/33970.htm.

Primer for Benjamin Moore 673 Iced Green depends on the substrate, its condition, and the product format. As a rule of thumb, a primer never hurts and can improve adhesion, but it is not always required. Use primer when the surface is bare, glossy, patched, repaired, or likely to show through the finish. If you are ordering a MyPerfectColor match of 673 Iced Green, check the prep guidance for the exact format you choose and test on the actual surface when the material or prior coating is uncertain.

Plastics vary widely, so Benjamin Moore 673 Iced Green should be tested on the actual material before you commit to a full job. MyPerfectColor spray paint sticks well to most plastics, but adhesion can improve with the right prep and primer. If the plastic is slick or low-energy, use MyPerfectColor primer for acrylic enamel to improve adhesion: https://www.myperfectcolor.com/en/product/995031-Primer-for-Acrylic-Enamel/.

For Benjamin Moore 673 Iced Green, the best spray results usually come from light, even coats rather than one heavy pass. Hold the can at a steady distance, overlap each pass slightly, and keep the spray moving so the film builds evenly. Heavy coats can cause runs, uneven sheen, or a muddied look, especially on smooth parts. If you are spraying a MyPerfectColor match of 673 Iced Green on trim pieces, fixtures, or hardware, let each coat flash before the next coat and keep the test area consistent with the finished piece.

MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore 673 Iced Green enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.

While we can provide Benjamin Moore 673 Iced Green in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.