Match of Prismatic Powders™ UMB-0492 Burnt Bronze *

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

A match of Prismatic Powders UMB-0492 Burnt Bronze is a deep, muted bronze-brown with a gray cast and low saturation. The metallic effect is subdued, so it reads as a dark industrial bronze rather than a bright copper or warm gold.

For Prismatic Powders powder-coated parts, MyPerfectColor precisely matches the color and finish, which makes this shade practical for touch-up after transportation damage, installation damage, fabrication work, service wear, or missed spots in the original finish. It can also be used on coated frames, brackets, railings, enclosures, vent covers, screw heads, trim plugs, end caps, and other ancillary items that need to coordinate with an assembled part.

As with many dark metallic finishes, the repaired area can read differently depending on gloss, film build, substrate color, and surface texture. A close color match does not guarantee that a small repair will disappear into an older cured finish, especially if the existing part has aged, weathered, or has a different sheen. On darker surfaces, edge lines and application overlap can be more noticeable.

This color is also useful for replacement hardware, fabricated add-ons, and sample panels when the goal is a precise color-and-finish match to the specified reference rather than duplicating every characteristic of an installed coating.

Product Data

See Technical Data Sheets
See Safety Data Sheets

About PRISMATIC POWDERS Coatings

Prismatic Powders, founded in 1984 by NIC Industries, is located in White City, Oregon. Prismatic Powders offers the largest selection of powder coating colors in the world, claiming the development of over 6,500 different colors and finishes. Prismatic Powders also offers a large array of specialty finishes and effects which makes it a popular choice for auto enthusiasts.

Matching Prismatic Powders Paint Colors

MyPerfectColor is able to match most of the Prismatic Powders paint colors so you can find and enjoy the colors you love. MyPerfectColor uses its expert capabilities to recreate the original Prismatic Powders color by matching the original Prismatic Powders color books and swatches. MyPerfectColor is not using Prismatic Powders coatings.

The colors shown on this website are computer video simulations of the Prismatic Powders Color and may not match Prismatic Powders Color standards. Refer to Prismatic Powders Publications to obtain an accurate color sample. Please know that MyPerfectColor is matching the original Prismatic Powders color. If you intend to touch up a coating, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.

If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.

Frequently Asked Questions About Match of Prismatic Powders™ UMB-0492 Burnt Bronze *

When matching Prismatic Powders UMB-0492 Burnt Bronze to an existing cured finish, will MyPerfectColor look the same on the part?

MyPerfectColor precisely matches the color and finish, but an older or already cured part can still read differently from a fresh touch-up. Gloss, texture, age, weathering, cure, substrate, and batch variation can all change how Prismatic Powders UMB-0492 Burnt Bronze appears beside the existing finish.

If the part is already installed or has been in service, compare against the actual part or an approved sample when possible, because the coating reference alone does not guarantee an invisible blend.

Can I use Prismatic Powders UMB-0492 Burnt Bronze for touch-up after shipping, installation, or fabrication damage?

Yes. A match of Prismatic Powders UMB-0492 Burnt Bronze is commonly used for touch-up after transportation damage, installation damage, fabrication damage, field modifications, drilled holes, cut edges, weld repair, rub marks, scratches, or missed spots in the original finish.

MyPerfectColor precisely matches the color and finish for the repair, but the surrounding cured finish still affects the final appearance, so a small touch-up may not disappear completely on an aged part.

Can Prismatic Powders UMB-0492 Burnt Bronze be used on plastic snaps, screw heads, trim plugs, and other ancillary hardware?

Yes. A match of Prismatic Powders UMB-0492 Burnt Bronze is often used to coordinate ancillary items such as plastic snaps, screw heads, rivet heads, trim plugs, end caps, clips, covers, fasteners, and small brackets that cannot go through the original coating process.

For these parts, order MyPerfectColor paint matched to the color reference and pick a format that fits the size and access of the part you are coating.

If I order a liquid touch-up for Prismatic Powders UMB-0492 Burnt Bronze, will it match the original powder-coated finish exactly?

MyPerfectColor precisely matches the color and finish, but a liquid touch-up can still look different next to a cured powder-coated part. Gloss, texture, metallic effect, film build, cure, and age all affect how UMB-0492 Burnt Bronze reads on the finished part.

Use the color reference as the starting point for matching, but if the repair must blend tightly beside an existing finish, a real part or approved sample is the safer comparison.

What product formats are available for Prismatic Powders UMB-0492 Burnt Bronze, and how do I choose?

A match of Prismatic Powders UMB-0492 Burnt Bronze can be ordered in MyPerfectColor touch-up paint, custom spray paint, paint pens, brush-in-cap bottles, and other formats depending on the job.

Use a spray format for larger exposed areas, and use a pen or brush-in-cap bottle for small chips, edges, hardware, and tight access areas. The right format depends on the size of the repair and how close you need to coordinate with the existing finish.

How quickly will I receive my paint matched to Prismatic Powders UMB-0492 Burnt Bronze?

All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match Prismatic Powders UMB-0492 Burnt Bronze depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.

Can I use this as touch up paint for the Prismatic Powders UMB-0492 Burnt Bronze coating?

Yes, you can use the acrylic enamel paint as a touch up for the Prismatic Powders UMB-0492 Burnt Bronze coating. MyPerfectColor precisely matches the color and sheen of the official Prismatic Powders color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

What type of paint is used to make touch up for the Prismatic Powders UMB-0492 Burnt Bronze? And how much area will one can of spray paint cover?

To make touch up paint for the Prismatic Powders UMB-0492 Burnt Bronze, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

Will the paint match both the color and the sheen of the original Prismatic Powders UMB-0492 Burnt Bronze coating?

MyPerfectColor acrylic enamel paint matching the Prismatic Powders UMB-0492 Burnt Bronze will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Prismatic Powders metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

How does MyPerfectColor match paint to the Prismatic Powders UMB-0492 Burnt Bronze color?

MyPerfectColor has the original Prismatic Powders UMB-0492 Burnt Bronze sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the Prismatic Powders UMB-0492 Burnt Bronze by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.

Do I need a primer for Prismatic Powders UMB-0492 Burnt Bronze?

The need for primer for Prismatic Powders UMB-0492 Burnt Bronze depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.