Match of Prismatic Powders™ PPS-4005 Casper Clear *

MyPerfectColor precisely matches the color and finish of Prismatic Powders PPS-4005 Casper Clear, but an older cured part can still read differently once it is installed next to the new repair. Gloss loss, texture, film build, surface prep, cure, age, weathering, and batch variation can all change how the existing finish looks.

If the part you are matching is already in service, treat the original coated part as a visual reference, not a guarantee of an identical in-place result. For the tightest match, a sample panel or the actual part is safer than relying on the color name alone.

Yes. A match of Prismatic Powders PPS-4005 Casper Clear is commonly ordered as touch-up paint for chips, scratches, rub marks, transport damage, installation damage, fabrication damage, drilled holes, cut edges, field modifications, or missed spots in the original finish.

MyPerfectColor precisely matches the color and finish so you can repair the affected area or coat the exposed spot with a finish that is intended to coordinate with the surrounding part. For the best result, match the damaged area carefully and confirm whether you are repairing a small spot or refinishing a larger visible section.

Yes. MyPerfectColor matched to Prismatic Powders PPS-4005 Casper Clear is often used for ancillary items such as screw heads, rivet heads, clips, trim plugs, end caps, fastener covers, brackets, and plastic snaps that cannot go through the same original coating process as the main part.

These items usually need close coordination with the surrounding coated assembly rather than a full factory coating cycle. A custom-matched paint product is the practical choice when you need the small part to visually coordinate with the PPS-4005 Casper Clear reference.

Not always. MyPerfectColor precisely matches the color and finish of Prismatic Powders PPS-4005 Casper Clear, but a liquid touch-up can still look different beside a cured coated part because the original finish may have its own gloss, texture, cure, and film-build behavior.

This matters most when you are comparing the new repair directly against an existing coated part. If the goal is to coordinate a separate part, accessory, or replacement component, the match is usually more straightforward than a small repair next to an aged finish.

Gloss, texture, and film build can change how Prismatic Powders PPS-4005 Casper Clear reads after application, even when the color reference is correct. A smooth liquid finish can look different from a textured, matte, or otherwise specialized coated surface.

If the original finish has a distinct surface feel or sheen, use that as part of the match decision and not just the color name. For the best ordering result, identify whether you are matching a smooth part, a textured part, or a small touch-up area beside an already cured finish.

Yes, you can use the acrylic enamel paint as a touch up for the Prismatic Powders PPS-4005 Casper Clear coating. MyPerfectColor precisely matches the color and sheen of the official Prismatic Powders color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

To make touch up paint for the Prismatic Powders PPS-4005 Casper Clear, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

MyPerfectColor acrylic enamel paint matching the Prismatic Powders PPS-4005 Casper Clear will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Prismatic Powders metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

MyPerfectColor has the original Prismatic Powders PPS-4005 Casper Clear sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the Prismatic Powders PPS-4005 Casper Clear by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.