70% of Orders Ship within 3 Business Days.
Match of Cerakote™ Bolt Blue F-121 *
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
Ready to purchase? Select your options in the 4 steps below.
A match of Cerakote Bolt Blue F-121 is a deep blue with a cool lean and a slightly muted, low-chroma character. Its low LRV means it reads as a dark finish rather than a bright blue, and the violet-leaning hue keeps it from feeling green or teal.
This color is a practical fit for spray-paint touch-up after transportation damage, installation damage, fabrication work, service damage, or missed spots in the original finish. Use it on coated enclosures, brackets, frames, railings, switch covers, screw heads, clips, trim plugs, end caps, and other ancillary parts that need to coordinate with a coated assembly. MyPerfectColor precisely matches the color and finish, which also makes it useful for replacement parts, sample panels, and small fabricated details.
Because this is a dark, moderately saturated blue, surface texture, sanding marks, and sheen differences can be more noticeable than the color itself. On contrasting or uneven substrates, careful film build may be needed for even coverage. Small touch-up areas beside an older cured finish can still show a slight shift in gloss or edge definition even when the color match is correct.
If the target part has aged, weathered, or been exposed to service conditions, the fresh paint may not read exactly like the existing cured finish in every light. For tight visual tolerance, comparing against the actual part or an approved sample is safer than relying on the reference alone.
Similar colors:
Product Data
About Cerakote Paint
Cerakote® is the world leader in firearm coatings. Since 1984, Cerakote has focused on developing and manufacturing ceramic coatings which are used by more firearm manufacturers than any other firearm coating.
Matching Cerakote Paint Colors
MyPerfectColor is able match most of the Cerakote paint colors in touch up paint. MyPerfectColor uses its expert capabilities to precisely match the color and sheen of the original Cerakote color by matching the original Cerakote swatches (when purchasing spray paint, paint pens and brush in cap bottles). MyPerfectColor is not using Cerakote paint.
The colors shown on this website are computer video simulations of the Cerakote Color and may not match Cerakote Color standards. Refer to Cerakote Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original Cerakote color. If you intend to touch up paint that is old, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
Frequently Asked Questions About Match of Cerakote™ Bolt Blue F-121 *
Will MyPerfectColor's match for Cerakote Bolt Blue F-121 look exactly like my older cured finish?
MyPerfectColor precisely matches the color and finish of Cerakote Bolt Blue F-121, but an older cured part can still read differently next to fresh paint. Gloss, texture, age, weathering, film build, cure differences, and batch variation can all affect how the finish appears in place.
If you are matching beside an existing coated part, treat the reference color as the starting point and expect the installed finish to be judged in real-world lighting on the actual part.
Is Cerakote Bolt Blue F-121 a good choice for touch-up after transport damage, installation damage, or missed spots?
Yes. A match of Cerakote Bolt Blue F-121 is commonly used as touch-up paint for chips, scratches, rub marks, transportation damage, installation damage, fabrication damage, drilled holes, cut edges, field modifications, and missed spots in the original finish.
Order the format that fits the repair area, then apply it as a local repair on the damaged or uncovered spot. MyPerfectColor precisely matches the color and finish so the touch-up is based on the correct coating reference.
Can I use Cerakote Bolt Blue F-121 on plastic snaps, screw heads, and other ancillary parts?
Yes. A match of Cerakote Bolt Blue F-121 is often used for ancillary items that need to coordinate with a coated assembly but cannot go through the original finishing process, such as plastic snaps, screw heads, rivet heads, trim plugs, end caps, clips, covers, and small hardware.
For these parts, MyPerfectColor precisely matches the color and finish so the replacement or add-on part can visually coordinate with the surrounding finish. Touch-up paint, spray paint, and paint pen formats may be useful depending on the size and shape of the part.
If Cerakote Bolt Blue F-121 came from a liquid coating reference, will a liquid paint touch-up match the cured finish exactly?
MyPerfectColor precisely matches the color and finish of Cerakote Bolt Blue F-121, but a fresh liquid touch-up can still look different beside an older cured finish. The original part may have different gloss, texture, film build, cure, age, or substrate behavior that changes how the color reads in place.
Use the reference as the correct starting point, but do not expect a liquid repair to duplicate every visual property of the cured part in every lighting condition.
What surface prep should I use before applying Cerakote Bolt Blue F-121 to metal, plastic, or a previously coated part?
Start with a clean surface. Remove dust, oils, and contaminants, then degrease the area before applying Cerakote Bolt Blue F-121. On smooth or previously coated areas, a light scuff may help adhesion where appropriate.
Metal, plastic, and previously coated parts do not all behave the same, so primer choice and prep should be based on the substrate and the repair scope. If the part is critical or high-visibility, test the process on a small area first.
How quickly will I receive my paint matched to Cerakote Bolt Blue F-121?
Can I use this as touch up paint for the Cerakote Bolt Blue F-121 coating?
Yes, you can use the acrylic enamel paint as a touch up for the Cerakote Bolt Blue F-121 coating. MyPerfectColor precisely matches the color and sheen of the official Cerakote color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.
Learn more about our color matching services.
What type of paint is used to make touch up for the Cerakote Bolt Blue F-121? And how much area will one can of spray paint cover?
To make touch up paint for the Cerakote Bolt Blue F-121, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.
Will the paint match both the color and the sheen of the original Cerakote Bolt Blue F-121 coating?
MyPerfectColor acrylic enamel paint matching the Cerakote Bolt Blue F-121 will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Cerakote metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.
How does MyPerfectColor match paint to the Cerakote Bolt Blue F-121 color?
MyPerfectColor has the original Cerakote Bolt Blue F-121 sample in our color archive. We are able to make paint and verify that it matches the original.
Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.
MyPerfectColor matches the Cerakote Bolt Blue F-121 by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.
Do I need a primer for Cerakote Bolt Blue F-121?