Looking for color by Hex, RGB, CMYK, or Lab?

Match of Prismatic Powders™ PMB-4911 Speedway Grey *

Color Image

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

Fast Shipping

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

A match of Prismatic Powders PMB-4911 Speedway Grey is a dark, low-chroma gray with a cool cast and a subtle metallic look. It sits close to neutral, but the slight blue-green bias and low light reflectance give it a muted industrial character rather than a clean bright gray.

This shade works well for touch-up after transportation damage, installation damage, fabrication work, or missed spots in the original powder-coated finish. It can be used on coated panels, frames, brackets, enclosures, railings, housings, vent covers, screw heads, trim plugs, end caps, and other ancillary parts that need to blend with a coated assembly. MyPerfectColor precisely matches the color and finish, so it is also useful for replacement parts, sample panels, and fabricated details that need to coordinate with a known Prismatic Powders reference.

Because this is a dark metallic finish, sheen, film build, substrate color, and spray overlap can affect how evenly it reads. Small touch-up areas may show edges or a slight shift in reflection beside an older cured finish, even when the color match is correct. A darker tone like this can also make surface prep and any texture differences more noticeable, so a complete repaint of a replacement part often gives a more uniform result than blending into aged coating.

For fabrication, maintenance, and approval work, MyPerfectColor can supply this match in touch-up paint or custom spray paint formats for coated-finish coordination. If you are matching an older installed part, keep in mind that the original cured finish may have changed in gloss or texture over time, so the coating reference is often a better guide than a weathered surface.

Similar colors:

PSB-5914 Accurate Grey
PSB-5589 Viking Grey
PSB-6770 Urban Stealth

Product Data

About PRISMATIC POWDERS Coatings

Prismatic Powders, founded in 1984 by NIC Industries, is located in White City, Oregon. Prismatic Powders offers the largest selection of powder coating colors in the world, claiming the development of over 6,500 different colors and finishes. Prismatic Powders also offers a large array of specialty finishes and effects which makes it a popular choice for auto enthusiasts.

Matching Prismatic Powders Paint Colors

MyPerfectColor is able to match most of the Prismatic Powders paint colors so you can find and enjoy the colors you love. MyPerfectColor uses its expert capabilities to recreate the original Prismatic Powders color by matching the original Prismatic Powders color books and swatches. MyPerfectColor is not using Prismatic Powders coatings.

The colors shown on this website are computer video simulations of the Prismatic Powders Color and may not match Prismatic Powders Color standards. Refer to Prismatic Powders Publications to obtain an accurate color sample. Please know that MyPerfectColor is matching the original Prismatic Powders color. If you intend to touch up a coating, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.

If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.

Frequently Asked Questions About Match of Prismatic Powders™ PMB-4911 Speedway Grey *

Will PMB-4911 Speedway Grey from Prismatic Powders match an older cured finish on an existing part exactly?

It is a match of PMB-4911 Speedway Grey, and MyPerfectColor precisely matches the color and finish to that reference. Even so, an older or already cured part can read differently because gloss, texture, age, weathering, cure, substrate, and batch variation all affect appearance.

If you are matching against a visible installed part, treat the brand color reference as the starting point, not a guarantee that the repair will blend invisibly.

Is PMB-4911 Speedway Grey from Prismatic Powders the right choice for touch-up after transport damage, installation damage, or missed spots?

Yes. A match of Prismatic Powders PMB-4911 Speedway Grey is commonly used for touch-up on coated parts after transportation damage, installation damage, fabrication damage, field modification damage, or missed spots in the original finish.

MyPerfectColor precisely matches the color and finish, so it is suitable when you need a repair that coordinates with the coated part rather than a full refinish. Use it on the damaged area after proper surface preparation for the substrate and repair size.

Can PMB-4911 Speedway Grey be used on plastic snaps, screw heads, or other hardware that cannot go through the original coating process?

Yes. A match of Prismatic Powders PMB-4911 Speedway Grey is often used to coordinate ancillary items such as plastic snaps, screw heads, rivet heads, trim plugs, end caps, clips, covers, brackets, and similar small parts that cannot go through the original finish process.

If the goal is to make those parts read closer to the surrounding finish, order a match of PMB-4911 Speedway Grey in the format that fits the part size and application method.

Will a liquid match of PMB-4911 Speedway Grey look identical to the cured Prismatic Powders finish?

Not necessarily. Even when the color reference is correct, a liquid touch-up can still read differently next to a cured finish because gloss, texture, metallic effect, film build, substrate, cure, and age all influence how the finish looks.

MyPerfectColor precisely matches the color and finish, but a fresh repair should still be checked against the existing part when the area is highly visible or the finish has aged.

What product formats are available for PMB-4911 Speedway Grey from Prismatic Powders, and how should I order it?

A match of Prismatic Powders PMB-4911 Speedway Grey can be ordered in touch-up paint, custom spray paint, paint pens, brush-in-cap bottles, and other formats such as epoxy or urethane when those fit the repair.

Choose the format based on the part size, access, and whether you are repairing small hardware, a small damaged area, or a larger visible section. For ordering, use the color code PMB-4911 Speedway Grey so you get a match of the correct reference.

How quickly will I receive my paint matched to Prismatic Powders PMB-4911 Speedway Grey?
All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match Prismatic Powders PMB-4911 Speedway Grey depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.
Can I use this as touch up paint for the Prismatic Powders PMB-4911 Speedway Grey coating?

Yes, you can use the acrylic enamel paint as a touch up for the Prismatic Powders PMB-4911 Speedway Grey coating. MyPerfectColor precisely matches the color and sheen of the official Prismatic Powders color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

What type of paint is used to make touch up for the Prismatic Powders PMB-4911 Speedway Grey? And how much area will one can of spray paint cover?

To make touch up paint for the Prismatic Powders PMB-4911 Speedway Grey, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

Will the paint match both the color and the sheen of the original Prismatic Powders PMB-4911 Speedway Grey coating?

MyPerfectColor acrylic enamel paint matching the Prismatic Powders PMB-4911 Speedway Grey will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Prismatic Powders metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

How does MyPerfectColor match paint to the Prismatic Powders PMB-4911 Speedway Grey color?

MyPerfectColor has the original Prismatic Powders PMB-4911 Speedway Grey sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the Prismatic Powders PMB-4911 Speedway Grey by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.

Do I need a primer for Prismatic Powders PMB-4911 Speedway Grey?
The need for primer for Prismatic Powders PMB-4911 Speedway Grey depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.