70% of Orders Ship within 3 Business Days.
Match of PPG Powder™ PCTA80404 Ww White T0-1025 *
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
Copy below code in your post
Ready to purchase? Select your options in the 4 steps below.
A match of PPG Powder PCTA80404 Ww White T0-1025 reads as a soft white with a slight warm cast rather than a sharp, blue-white look. It is a light, low-saturation finish that can appear quiet and clean, with the exact appearance influenced by gloss, film build, and substrate.
For powder-coated parts, MyPerfectColor precisely matches the color and finish for touch-up after transportation damage, installation damage, fabrication work, service wear, or missed spots in the original finish. It can also be used on replacement hardware, screw heads, trim plugs, end caps, brackets, vent covers, switch plates, sample panels, and other paintable details that need to coordinate with an existing coated assembly.
Because this is a very light color, coverage over dark or uneven substrates can take extra coats, and any thin spot or surface defect may show through more easily. Small repairs beside an aged cured finish can also reveal sheen or texture differences even when the color match is close, so finish conditions matter as much as color when planning the repair.
Product Data
About PPG Powder Coatings
PPG, a global leader in the coatings industry, has long been at the forefront of powder coating technology. Originally known for its high-quality liquid coatings, PPG expanded into powder coatings, leveraging its extensive experience to offer products characterized by exceptional durability, environmental friendliness, and cost-efficiency. These powder coatings, formulated without volatile organic compounds (VOCs), embody PPG's commitment to innovation, sustainability, and superior performance. With a focus on addressing the comprehensive needs of its customers, PPG continues to drive advancements in the field, setting new standards in coating solutions worldwide.
Matching PPG Powder Colors
MyPerfectColor is able match all of the PPG Powder paint colors so you can find and enjoy the colors you love. MyPerfectColor uses its expert capabilities to recreate the original PPG Powder color by matching the original PPG Powder color books and swatches. MyPerfectColor is not using PPG Powder paint.
The colors shown on this website are computer video simulations of the PPG Powder Color and may not match PPG Powder Color standards. Refer to PPG Powder Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original PPG Powder color. If you intend to touch up paint that years old, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
Frequently Asked Questions About Match of PPG Powder™ PCTA80404 Ww White T0-1025 *
Will PCTA80404 Ww White T0-1025 match an older cured finish on my part exactly?
MyPerfectColor precisely matches the color and finish of PCTA80404 Ww White T0-1025, but an older cured part can still read differently beside a fresh repair. Gloss, texture, age, weathering, cure history, surface prep, and batch variation can all affect what you see on the installed part.
If the match will be viewed next to an existing finish, compare against the actual part or an approved sample panel before ordering.
When should I use PCTA80404 Ww White T0-1025 for touch-up work?
Use PCTA80404 Ww White T0-1025 for chips, scratches, rub marks, handling damage, transport damage, installation damage, fabrication damage, drilled holes, cut edges, field modifications, or missed spots in the original finish.
This is MyPerfectColor paint matched to the PCTA80404 Ww White T0-1025 reference for repair and coordination work. It is not the original coating material.
Can PCTA80404 Ww White T0-1025 be used on screw heads, clips, trim plugs, or plastic snaps?
Yes. A match of PPG Powder PCTA80404 Ww White T0-1025 is a practical choice for ancillary items that need to coordinate with a coated assembly but cannot go through the original finishing process.
That includes screw heads, clips, trim plugs, end caps, covers, brackets, and similar small parts. For MyPerfectColor to be the right choice, the goal should be close color coordination, not reproducing the full factory coating process on the part itself.
Will a liquid match for PCTA80404 Ww White T0-1025 look identical to the cured finish on my part?
Not always. MyPerfectColor precisely matches the color and finish, but a fresh liquid application can still look different from the original cured finish because of gloss, texture, film build, substrate, cure, and age.
If you need the best decision for a side-by-side repair, use the actual part or an approved sample panel as the reference rather than relying on the color name alone.
What finish details should I consider when ordering PCTA80404 Ww White T0-1025?
Consider more than the color name. With PCTA80404 Ww White T0-1025, gloss level, surface texture, film build, and any special effect behavior can change how the finish reads after application.
If the original part is smooth, satin, textured, matte, or otherwise specialized, order to the real surface condition you need to match, not just the name on the reference.
Color details
Color properties
Source on hand:
PPG
