70% of Orders Ship within 3 Business Days.
Match of PPG Powder™ PCFA60157 PMS 7427C Red H0-434 *
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
Copy below code in your post
Ready to purchase? Select your options in the 4 steps below.
PMS 7427C Red H0-434 is a subdued red with a warm, slightly earthy cast. It is less clean and bright than a pure signal red, with a deeper, more grounded appearance that can read softer under lower gloss.
MyPerfectColor custom-matched spray paint can be used for touch-up after transportation damage, installation damage, fabrication work, service wear, or missed spots in the original finish. It is a practical option for powder-coated frames, brackets, enclosures, railings, machine guards, and similar metal parts where the repair needs to follow the reference color closely.
The same match can also help with ancillary items that cannot go through the original coating process, such as screw heads, trim plugs, fastener covers, end caps, clips, and small fabricated accessories. MyPerfectColor precisely matches the color and finish, which matters when a separate part needs to coordinate with a coated assembly.
As with many coated-finish matches, the final appearance can shift with gloss, texture, substrate color, and film build. A red of this depth may show edge contrast or sheen differences more readily on a repaired spot than on a fully refinished part, so close color work is often easier when the repair is on its own piece rather than beside an aged cured finish.
Product Data
About PPG Powder Coatings
PPG, a global leader in the coatings industry, has long been at the forefront of powder coating technology. Originally known for its high-quality liquid coatings, PPG expanded into powder coatings, leveraging its extensive experience to offer products characterized by exceptional durability, environmental friendliness, and cost-efficiency. These powder coatings, formulated without volatile organic compounds (VOCs), embody PPG's commitment to innovation, sustainability, and superior performance. With a focus on addressing the comprehensive needs of its customers, PPG continues to drive advancements in the field, setting new standards in coating solutions worldwide.
Matching PPG Powder Colors
MyPerfectColor is able match all of the PPG Powder paint colors so you can find and enjoy the colors you love. MyPerfectColor uses its expert capabilities to recreate the original PPG Powder color by matching the original PPG Powder color books and swatches. MyPerfectColor is not using PPG Powder paint.
The colors shown on this website are computer video simulations of the PPG Powder Color and may not match PPG Powder Color standards. Refer to PPG Powder Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original PPG Powder color. If you intend to touch up paint that years old, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
Frequently Asked Questions About Match of PPG Powder™ PCFA60157 PMS 7427C Red H0-434 *
Will MyPerfectColor made for PCFA60157 PMS 7427C Red H0-434 match an existing cured finish exactly?
MyPerfectColor precisely matches the color and finish of PCFA60157 PMS 7427C Red H0-434, but an older or already cured part may still not read exactly the same in place. Gloss, texture, cure, age, substrate, film build, and batch variation can all change how the finish appears. If the part is highly visible or already weathered, compare against the actual piece or an approved sample before ordering.
Can I use PCFA60157 PMS 7427C Red H0-434 for touch-up after transportation damage, installation damage, fabrication damage, or missed spots?
Yes. A match of PPG Powder PCFA60157 PMS 7427C Red H0-434 is a good reference when you need touch-up paint for chips, scratches, rub marks, drilled holes, cut edges, field modifications, or missed coverage from the original coating process. It is meant for repair and coordination work, not as the original powder coating material. For larger visible areas, it may be better to repaint the full part so the repaired section blends more consistently.
Can PCFA60157 PMS 7427C Red H0-434 be used on plastic snaps, screw heads, trim plugs, or other ancillary parts?
Yes, this color is often used on small ancillary items that need to coordinate with a coated assembly, such as plastic snaps, screw heads, rivet heads, trim plugs, end caps, clips, covers, and similar hardware. Those parts usually cannot go through the same original coating process, so a matched paint is the practical way to keep them aligned with PCFA60157 PMS 7427C Red H0-434. Make sure the part is clean and paintable, and confirm adhesion on the material you are coating.
If I order a liquid paint match to PCFA60157 PMS 7427C Red H0-434, will it look identical to the original powder-coated finish?
Not necessarily. MyPerfectColor precisely matches the color and finish of PCFA60157 PMS 7427C Red H0-434, but a fresh liquid touch-up can still read differently next to a cured powder-coated part because the original finish may have its own gloss, texture, cure, and film-build behavior. That is normal for coating references. A liquid match is best when you need a close color and finish match for touch-up, prototypes, or adjacent parts, not a promise that every cured surface detail will disappear.
Should I match PCFA60157 PMS 7427C Red H0-434 by code, or is an existing part or approved sample better?
If the part is highly visible, the tolerance is tight, or the finish has texture, metallic effect, or age-related change, an existing coated part or approved sample panel is usually the safer reference. The code PCFA60157 PMS 7427C Red H0-434 is often enough for standard touch-up, coordination on ancillary parts, or less critical work. When the appearance must line up with a specific production finish, use the actual part or sample whenever possible.
Color details
Color properties
Source on hand:
PPG
