Match of PPG Powder™ PCTA59110 RAL 5010 Gentian Blue *

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

RAL 5010 Gentian Blue is a dark blue with a muted green cast, so it reads less like a clean primary blue and more like a deeper blue-cyan. Its low LRV gives it a strong, low-lightness appearance, while the moderate chroma keeps it from looking gray or washed out.

MyPerfectColor precisely matches the color and finish for touch-up after transportation damage, installation damage, fabrication work, service damage, or missed spots in the original powder-coated finish. In spray-paint form, it can be used on railings, enclosures, machine guards, frames, brackets, vents, switch covers, screw heads, end caps, and other ancillary parts that need to coordinate with a coated assembly.

Because this is a dark color, repaired edges, sheen changes, and surface texture differences can be more noticeable on smooth or glossy parts, especially beside a cured finish. Film build, substrate, and prep can shift how deep the blue reads, so a close color-and-finish match matters more than color alone when the part is already in service or weathered.

Product Data

See Technical Data Sheets
See Safety Data Sheets

About PPG Powder Coatings

PPG, a global leader in the coatings industry, has long been at the forefront of powder coating technology. Originally known for its high-quality liquid coatings, PPG expanded into powder coatings, leveraging its extensive experience to offer products characterized by exceptional durability, environmental friendliness, and cost-efficiency. These powder coatings, formulated without volatile organic compounds (VOCs), embody PPG's commitment to innovation, sustainability, and superior performance. With a focus on addressing the comprehensive needs of its customers, PPG continues to drive advancements in the field, setting new standards in coating solutions worldwide.

Matching PPG Powder Colors

MyPerfectColor is able match all of the PPG Powder paint colors so you can find and enjoy the colors you love. MyPerfectColor uses its expert capabilities to recreate the original PPG Powder color by matching the original PPG Powder color books and swatches. MyPerfectColor is not using PPG Powder paint.

The colors shown on this website are computer video simulations of the PPG Powder Color and may not match PPG Powder Color standards. Refer to PPG Powder Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original PPG Powder color. If you intend to touch up paint that years old, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.

If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.

Frequently Asked Questions About Match of PPG Powder™ PCTA59110 RAL 5010 Gentian Blue *

Will MyPerfectColor match PCTA59110 RAL 5010 Gentian Blue if I am spraying beside an existing cured powder-coated part?

MyPerfectColor precisely matches the color and finish of PCTA59110 RAL 5010 Gentian Blue, but an older cured part can still read differently next to a fresh repair. Gloss, texture, age, weathering, cure, and batch variation can all affect how the finished area looks.

If the repair will sit next to an existing coated part, the safest approach is to compare against the actual part or an approved sample when possible. That is especially important when the finish must blend closely in visible areas.

Can I use PCTA59110 RAL 5010 Gentian Blue for touch-up after transport damage, installation damage, or missed spots in the original finish?

Yes. A match of PPG Powder PCTA59110 RAL 5010 Gentian Blue is commonly used as touch-up paint for chips, scratches, rub marks, drilled holes, cut edges, fabrication damage, field modifications, and missed spots in the original coating process.

MyPerfectColor precisely matches the color and finish, which helps when you need to repair a coated part without recoating the entire assembly. If the damaged area is on a visible surface, check whether the surrounding finish has aged or changed gloss before ordering.

Can PCTA59110 RAL 5010 Gentian Blue be used on screw heads, plastic snaps, trim plugs, or other small hardware that cannot be powder coated?

Yes. A match of PPG Powder PCTA59110 RAL 5010 Gentian Blue is often ordered for ancillary parts and hardware that need to coordinate with a coated assembly, such as screw heads, rivet heads, plastic snaps, trim plugs, end caps, clips, covers, and brackets.

These items usually cannot go through the same original coating process as the main part, so the goal is close color coordination rather than duplicating the entire factory finish system.

If I order PCTA59110 RAL 5010 Gentian Blue as liquid paint, will it look identical to the original powder-coated finish?

Not always. MyPerfectColor precisely matches the color and finish of PCTA59110 RAL 5010 Gentian Blue, but a fresh liquid touch-up can still look different beside an older cured finish because the original part may have its own gloss, texture, film build, cure, age, and surface behavior.

This is why the color reference is a starting point, not a guarantee that a small touch-up will visually disappear on a cured coated part. If exact side-by-side appearance is critical, use the actual part or an approved sample as the reference when possible.

What surface prep should I use before applying PCTA59110 RAL 5010 Gentian Blue to metal, plastic, or a previously coated part?

Start with a clean, dry surface and remove any oil, dust, wax, or loose coating before applying PCTA59110 RAL 5010 Gentian Blue. Light scuffing may help on sound existing finishes when you need better adhesion, but damaged or failing coatings should be addressed first.

Metal, plastic, and previously coated parts do not all behave the same, so primer choice depends on the substrate and condition of the surface. If the part is critical or the area is small and visible, test on an inconspicuous spot before finishing the full repair.