Match of Prismatic Powders™ UMB-6578 Forged Charcoal *

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

A match of Prismatic Powders UMB-6578 Forged Charcoal is a deep charcoal gray with a muted, industrial character. It reads as a dark gray rather than a true black, with a restrained, low-saturation appearance that works well on coated metal parts and hardware where a harder, darker finish is expected.

For touch-up after transportation damage, installation damage, fabrication work, service damage, or missed spots in the original finish, MyPerfectColor custom spray paint precisely matches the color and finish. It can be used on brackets, enclosures, railings, frames, switch covers, screw heads, trim plugs, end caps, vent pieces, and other ancillary items that need to coordinate with a powder-coated assembly.

Because this is a dark charcoal, surface prep, sheen, texture, and film build can influence how close the repair reads beside a cured existing finish. Small touch-up areas may show edges or sheen differences more readily than the color itself, especially on older or weathered parts. When the tolerance is tight, a replacement part, sample panel, or approved reference is often the safer comparison than relying on an aged installed piece alone.

It is also useful for prototype hardware, fabricated details, and replacement components that cannot go through the original coating process but still need close color coordination with surrounding powder-coated or coated metalwork.

Product Data

See Technical Data Sheets
See Safety Data Sheets

About PRISMATIC POWDERS Coatings

Prismatic Powders, founded in 1984 by NIC Industries, is located in White City, Oregon. Prismatic Powders offers the largest selection of powder coating colors in the world, claiming the development of over 6,500 different colors and finishes. Prismatic Powders also offers a large array of specialty finishes and effects which makes it a popular choice for auto enthusiasts.

Matching Prismatic Powders Paint Colors

MyPerfectColor is able to match most of the Prismatic Powders paint colors so you can find and enjoy the colors you love. MyPerfectColor uses its expert capabilities to recreate the original Prismatic Powders color by matching the original Prismatic Powders color books and swatches. MyPerfectColor is not using Prismatic Powders coatings.

The colors shown on this website are computer video simulations of the Prismatic Powders Color and may not match Prismatic Powders Color standards. Refer to Prismatic Powders Publications to obtain an accurate color sample. Please know that MyPerfectColor is matching the original Prismatic Powders color. If you intend to touch up a coating, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.

If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.

Frequently Asked Questions About Match of Prismatic Powders™ UMB-6578 Forged Charcoal *

Can MyPerfectColor match Prismatic Powders UMB-6578 Forged Charcoal on an older cured part and still look exact beside the existing finish?

MyPerfectColor precisely matches the color and finish for Prismatic Powders UMB-6578 Forged Charcoal, but an older cured part can still read differently next to a fresh repair. Gloss, texture, age, weathering, cure, substrate, and batch variation can all change how the finish looks in use.

If you need a side-by-side visual match on an existing part, the safest approach is to compare against the actual cured part or an approved sample, not the color name alone.

Is Prismatic Powders UMB-6578 Forged Charcoal a good choice for touch-up after shipping damage, installation damage, or missed spots in the original finish?

Yes. A match of Prismatic Powders UMB-6578 Forged Charcoal is commonly used as touch-up paint for chips, scratches, rub marks, transport damage, installation damage, fabrication damage, drilled holes, cut edges, field modifications, and missed spots in the original finish.

MyPerfectColor precisely matches the color and finish so the repair starts from the correct reference. It is still important to confirm the application area and the format you need, such as touch-up paint, spray paint, or paint pens.

Can Prismatic Powders UMB-6578 Forged Charcoal be used on screw heads, plastic snaps, trim plugs, or other ancillary parts that cannot go through the original coating process?

Yes. A match of Prismatic Powders UMB-6578 Forged Charcoal is often ordered for ancillary items such as screw heads, rivet heads, plastic snaps, trim plugs, end caps, clips, covers, brackets, and fastener hardware that need to coordinate with a coated assembly.

MyPerfectColor precisely matches the color and finish so these separate parts can blend with the surrounding finish, even when they cannot be processed through the original coating line.

If I order a liquid touch-up for Prismatic Powders UMB-6578 Forged Charcoal, will it look identical to the cured powder-coated finish?

Not always. MyPerfectColor precisely matches the color and finish for Prismatic Powders UMB-6578 Forged Charcoal, but a fresh liquid touch-up can still read differently beside the original cured finish because of gloss, texture, film build, cure, substrate, and age.

This is true even when the color reference is correct. If the finish is highly visible, it is usually better to compare against the actual part or an approved sample than to rely on the name alone.

What should I confirm before ordering MyPerfectColor for Prismatic Powders UMB-6578 Forged Charcoal?

Before ordering MyPerfectColor for Prismatic Powders UMB-6578 Forged Charcoal, confirm the exact brand color, the finish expectations, the format you need, and the quantity. Custom-made color matches should be checked carefully before purchase because they are made to your selected reference.

If you are matching an existing part, it is best to confirm whether you are matching a standard reference or a cured finish with age, wear, or texture differences. That helps reduce the risk of ordering the wrong product.

How quickly will I receive my paint matched to Prismatic Powders UMB-6578 Forged Charcoal?

All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match Prismatic Powders UMB-6578 Forged Charcoal depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.

Can I use this as touch up paint for the Prismatic Powders UMB-6578 Forged Charcoal coating?

Yes, you can use the acrylic enamel paint as a touch up for the Prismatic Powders UMB-6578 Forged Charcoal coating. MyPerfectColor precisely matches the color and sheen of the official Prismatic Powders color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

What type of paint is used to make touch up for the Prismatic Powders UMB-6578 Forged Charcoal? And how much area will one can of spray paint cover?

To make touch up paint for the Prismatic Powders UMB-6578 Forged Charcoal, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

Will the paint match both the color and the sheen of the original Prismatic Powders UMB-6578 Forged Charcoal coating?

MyPerfectColor acrylic enamel paint matching the Prismatic Powders UMB-6578 Forged Charcoal will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Prismatic Powders metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

How does MyPerfectColor match paint to the Prismatic Powders UMB-6578 Forged Charcoal color?

MyPerfectColor has the original Prismatic Powders UMB-6578 Forged Charcoal sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the Prismatic Powders UMB-6578 Forged Charcoal by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.

Do I need a primer for Prismatic Powders UMB-6578 Forged Charcoal?

The need for primer for Prismatic Powders UMB-6578 Forged Charcoal depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.