70% of Orders Ship within 3 Business Days.
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
70% of Orders Ship within 3 Business Days.
Ready to purchase? Select your options in the 4 steps below.
A match of Benjamin Moore whisper CSP-500 is a very light, quiet neutral with a soft warm gray base. Its low chroma keeps it subdued rather than crisp, and the slight yellow-green bias can make it read warmer than a clean white without becoming strongly beige.
MyPerfectColor custom spray paint matched to Whisper CSP-500 works well on small parts and fixtures where a muted light neutral is needed. It can be used on HVAC vents, switch covers, speaker grilles, brackets, shelf supports, railings, mailboxes, PVC trim pieces, and hardware. It also suits baskets, frames, and furniture accents when a light, low-contrast finish is needed on a removable or sprayable part.
Because this is a very light color, the underlying surface can show through more readily over dark, stained, or uneven substrates. Good surface prep and enough film build matter, and the final appearance can shift with sheen and texture; smoother finishes tend to read cleaner, while flatter or rougher surfaces can make the color look softer and slightly more muted.
Similar colors:
Benjamin Moore has set the standard for excellence with their large selection of authentic colors such as the Benjamin Moore whisper CSP-500.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
MyPerfectColor makes a match of Whisper CSP-500 in its own paint formats, including custom spray paint and other specialty formats for color-matching projects. For Benjamin Moore colors in this collection, do not expect interior or exterior house paint options.
The sheen is a practical choice, not part of the color code itself. A flatter finish can hide texture and minor prep marks better, while a higher sheen is easier to clean but will reflect more light and can make Whisper CSP-500 look slightly different on the finished item. If you are matching an existing part, try to match the sheen as well as the color reference.
Use light, even coats and keep the can moving so the color builds gradually. Heavy wet passes are more likely to run, pool on edges, or leave the finish looking uneven. Several controlled coats usually give a smoother result than trying to cover in one pass.
Keep your overlap consistent and check the part from the same angle and lighting you will see in use. If the surface is dark, textured, or porous, expect the base material to affect hide and final appearance until enough coats are applied.
Yes. MyPerfectColor custom spray paint matched to Whisper CSP-500 is often a practical choice for small removable parts such as switch covers, vents, speaker grilles, brackets, trim pieces, knobs, and similar items. Spray application is useful when you want a smooth, repeatable finish on parts that are hard to coat evenly by brush.
For the best result, remove the item if possible, clean it thoroughly, and avoid loading too much paint into edges or recesses. Small parts show sheen and texture differences quickly, so prep and finish choice matter as much as the color match.
The SDS is tied to the specific MyPerfectColor product chemistry, not to the Whisper CSP-500 color name by itself. To get the correct sheet, use the MyPerfectColor Safety Data Sheets page for the product you are ordering.
If you are comparing more than one format, check the SDS for the exact MyPerfectColor product rather than assuming all formats share the same sheet.
Plastic varies a lot, so test on the actual part whenever possible. MyPerfectColor spray paint sticks well to most plastics, but difficult or low-energy plastics can still need better prep to avoid adhesion problems. Using the MyPerfectColor primer for Acrylic Enamel can improve adhesion on challenging surfaces.
If the part is glossy, flexible, or heavily handled, clean it carefully and do a small test first. That is the safest way to confirm how Whisper CSP-500 will behave on the specific plastic before you coat the full item.
MyPerfectColor spray paint is a fast-drying durable acrylic enamel coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Benjamin Moore whisper CSP-500 enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
The MyPerfectColor 11oz spray can will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.
No, MyPerfectColor uses a combination of proprietary ingredients to make interior and exterior housepaints, its own line of custom spray paint, and other acrylic enamel based products.
While we can provide Benjamin Moore whisper CSP-500 in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.
However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.
Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.