Looking for color by Hex, RGB, CMYK, or Lab?

Match of Kelly Moore™ T 36-1 Baby's Breath *

Color Image

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

  • Image Code
  • HTML
  • URL
  • Direct Image Link
Copy below code in your post
Fast Shipping

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

A match of Kelly Moore T 36-1 Baby's Breath is a very light, low-chroma gray-green with a soft cool cast. It reads more muted than clean, with enough green to keep it from looking flat and enough gray to keep the color restrained.

MyPerfectColor custom spray paint matched to the selected brand color can be useful on small parts and accessories that need a coordinated finish without drawing attention to the item itself. Common spray-paint uses include HVAC vents, switch plates, speaker grilles, access panels, PVC trim pieces, rail brackets, shelf hardware, picture frames, mailboxes, and other removable components where a light muted color is wanted on metal, plastic, wood, or previously coated surfaces after proper preparation.

Because this is a very light color, coverage can show substrate contrast more readily on dark or uneven surfaces. Smooth prep and consistent film build matter, and the final look can shift with sheen, surface texture, and the material being coated. On rough or porous parts, the color may read slightly deeper or less even until sufficient coverage is built.

The restrained tone also makes it practical for detailed work where a softer finished look is needed on small surfaces rather than a strong accent color. A custom match like this is often chosen for repeatable results on architectural trim pieces, fixtures, and fabricated parts that need to coordinate with an existing paint reference.

Similar colors:

KM3866-1 Colcannon
KM704-L Silver Cascade
WS56 White Bridge

Product Data

About Kelly Moore Paints

Since 1946, Kelly-Moore Paints has provided quality, innovative products, and exceptional service at a fair value. Kelly-Moore’s more than 1,700 new colors present endless color combinations.

Matching Kelly Moore Paint Colors

MyPerfectColor uses its expert capabilities to recreate the original Kelly Moore color by matching the original Kelly Moore color books and swatches.

The colors shown on this website are computer video simulations of the Kelly Moore Color and may not match Kelly Moore Color standards. Refer to Kelly Moore Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original Kelly Moore color. If you intend to touch up paint that has been on your walls for years, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.

If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.

Frequently Asked Questions About Match of Kelly Moore™ T 36-1 Baby's Breath *

How do I confirm T 36-1 Baby's Breath by Kelly Moore before ordering a MyPerfectColor match?

Confirm T 36-1 Baby's Breath from a physical swatch or another known color reference from the original Kelly Moore standard, not from a screen image alone. MyPerfectColor matches to the original brand color reference, so the target color should be verified before you place the order.

If you are matching an existing painted item, check the actual surface in the lighting where it will be used, since aging, sheen, and substrate can change how the color reads.

How much MyPerfectColor paint do I need for T 36-1 Baby's Breath?

Coverage for T 36-1 Baby's Breath depends on the size of the part, the texture of the surface, how well the old finish hides, the application method, and how many coats you need. A typical can of spray paint covers about 20 square feet with one coat.

For larger parts or rough surfaces, plan for extra material because coverage can drop when the surface is porous, uneven, or needs more than one coat.

Can T 36-1 Baby's Breath be used on plastic parts with MyPerfectColor spray paint?

Yes, but plastics vary a lot, so it is best to test T 36-1 Baby's Breath on the actual plastic before coating the full part. MyPerfectColor spray paint sticks well to most plastics, but some plastics need different prep or a primer for better adhesion.

If you want improved adhesion, use the MyPerfectColor primer for Acrylic Enamel before applying the color coat. This is especially helpful on unfamiliar, slick, or low-energy plastic surfaces.

What prep is needed for T 36-1 Baby's Breath on metal or an existing coating?

Before applying T 36-1 Baby's Breath over metal or a previously painted surface, clean off dust, oil, and other contamination, then scuff any glossy, intact coating so the new paint has a better surface to grip. If there is rust or failing paint, remove or stabilize it first.

The condition of the old coating matters because gloss, texture, and wear can change both adhesion and the final look. A test area is a practical way to check the result before coating the full item.

Where can I find SDS information for T 36-1 Baby's Breath?

SDS information for T 36-1 Baby's Breath depends on the MyPerfectColor product or chemistry, not the brand color name by itself. The color reference does not determine the safety data sheet.

MyPerfectColor Safety Data Sheets are available on the Safety Data Sheets page. Use the sheet for the exact product format you are ordering.

How quickly will I receive my paint matched to Kelly Moore T 36-1 Baby's Breath?
All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match Kelly Moore T 36-1 Baby's Breath depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.
What are the RGB, HEX and LRV values for Kelly Moore T 36-1 Baby's Breath?
The RGB values for Kelly Moore T 36-1 Baby's Breath are 210, 215, 208 and the HEX code is #D2D7D0. The LRV for Kelly Moore T 36-1 Baby's Breath is 66.81. The LRV stands for Light Reflectance Value and measures the percentage of light that a color reflects. Learn more about Light Reflectance Values and using RGB and Hex codes for paint.
What paint type is used to make spray paint matched to Kelly Moore T 36-1 Baby's Breath? And how many spray cans do I need?

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint matched to Kelly Moore T 36-1 Baby's Breath enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The MyPerfectColor 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge spray paint need as the coverage is highly dependent on how it is applied. Learn more about how spray paint works at MyPerfectColor.

What is the Hue Angle and Chroma for Kelly Moore T 36-1 Baby's Breath?
The Hue Angle for Kelly Moore T 36-1 Baby's Breath is 134.14 and the chroma is 3.76. The Hue Angle represents the position of a color's hue around a color wheel. The Chromacity represents the intensity of a hue. Learn more about browsing colors by hue.
How can MyPerfectColor match the Kelly Moore T 36-1 Baby's Breath?

MyPerfectColor has an original sample of the Kelly Moore T 36-1 Baby's Breath in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

Do I need a primer for Kelly Moore T 36-1 Baby's Breath?
The need for primer for Kelly Moore T 36-1 Baby's Breath depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.
How do I convert Kelly Moore T 36-1 Baby's Breath to a different company?

While we can provide Kelly Moore T 36-1 Baby's Breath in paint, we don't provide any crossover information. We've found that every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another brand.

However, under the color image on a color page there is a link that says "Explore Colors". Clicking this link displays colors with similar values and you can look for any colors from the brand you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.