Match of Sherwin Williams™ SW9619 Teakwood *

Even when the color match is correct, SW9619 Teakwood can read a little differently after it is applied because lighting, sheen, and nearby surfaces all affect how the eye sees it. The same MyPerfectColor match of SW9619 Teakwood may look warmer, flatter, or slightly more reflective depending on where it is used.

If the part will sit beside an existing painted surface or in strong daylight, treat the finished appearance as a real-world viewing result, not just a color chip result. That is normal for any custom-matched paint.

The Safety Data Sheet is tied to the MyPerfectColor product and chemistry, not to the SW9619 Teakwood color name by itself. To get the correct SDS, use the MyPerfectColor Safety Data Sheets page for this product.

MyPerfectColor Safety Data Sheets can be found here: https://www.myperfectcolor.com/Safety-Data-Sheets/33970.htm

Choose the sheen based on how the item will be used, not just on the SW9619 Teakwood color name. Lower sheen usually hides surface flaws better, while higher sheen usually gives more reflectivity and can be easier to clean.

For a MyPerfectColor match of SW9619 Teakwood, the sheen also changes how the color reads on the finished item. If the piece will be handled often or needs easier cleanup, pick the finish that best fits that use case before ordering.

Before applying a MyPerfectColor match of SW9619 Teakwood to metal or an older coating, clean the surface well and remove any rust, grease, dust, or contamination. If the existing finish is glossy or slick, scuffing it first can help the new coating bond better.

The condition of the old coating matters too. Texture, peeling, and uneven wear can all affect how SW9619 Teakwood looks after application, so a sound and properly prepared surface gives the best chance of a consistent result.

For spray paint matched to SW9619 Teakwood, dry-to-touch is usually within minutes, recoating is generally in one to two hours, and full curing takes about two weeks. Those are different stages, so a coat can feel dry before it is ready for full use.

If you are painting parts that will be handled, assembled, or stacked, wait for the coating to reach the right stage before moving on to the next step. That helps avoid fingerprints, marks, or disturbance of the finish.

MyPerfectColor has an original sample of the Sherwin Williams SW9619 Teakwood in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW9619 Teakwood. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW9619 Teakwood, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.