Match of Sherwin Williams™ SW9617 Beachcomber *

Yes. A match of Sherwin Williams SW9617 Beachcomber can be ordered as a MyPerfectColor custom spray paint match for small project items like baskets, frames, shelving, decor pieces, and furniture accents when spray application is the practical choice. It is meant to coordinate the object to the selected color reference, not to replace the original Sherwin Williams product line.

For best results, use it on a paintable surface that has been cleaned and prepared for coating. If the item has tight corners, trim details, or removable parts, spray paint is often easier to apply evenly than brush application.

Finish changes how SW9617 Beachcomber reflects light, so the same color match can look different after it is applied to the item. A flatter finish usually looks less reflective, while a glossier finish can make the coating read brighter or more noticeable on the surface.

That means sheen is a practical product choice, not just a style choice. The color reference stays the same, but the finished appearance can change with the coating finish, the substrate texture, and how the paint is applied.

The SDS is tied to the specific MyPerfectColor product and chemistry, not to the SW9617 Beachcomber color name alone. To get the correct Safety Data Sheet, look up the exact MyPerfectColor product format you are ordering.

MyPerfectColor Safety Data Sheets are available on the Safety Data Sheets page. If you are comparing product formats, confirm the exact item first so you are reading the SDS for the right coating.

For SW9617 Beachcomber spray paint, dry to touch is usually within minutes. Recoat is typically in one to two hours, and full cure is about two weeks.

Those are different stages, so do not treat dry to touch as fully cured. If the part will be handled, assembled, or exposed to wear, allow more time before putting it into service.

MyPerfectColor spray paint sticks well to most plastics, but plastics vary widely, so testing on the actual material is important. A match of Sherwin Williams SW9617 Beachcomber can be a good match for plastic parts, but surface prep can change how well it bonds and how the finish looks.

If you want better adhesion, use the MyPerfectColor primer for acrylic enamel before applying the color coat. Primer is especially helpful when the plastic is unfamiliar, slick, or difficult to coat evenly.

MyPerfectColor has an original sample of the Sherwin Williams SW9617 Beachcomber in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW9617 Beachcomber. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW9617 Beachcomber, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.