Match of Sherwin Williams™ SW9615 Prospect *

Choose the sheen based on how the part will be used and how closely it needs to match nearby surfaces. Glossier finishes are easier to wipe clean and look more reflective, while flatter finishes are less reflective and can be more forgiving on textured parts.

If you are painting something like vents, trim pieces, hardware, or a removable fixture, the sheen can change how SW9615 Prospect reads after it is applied. If the item will sit next to an existing painted surface, match the sheen as closely as possible so the finished part does not look different just because the gloss level changed.

Not always. Even when the color match is correct, SW9615 Prospect can read differently in daylight, warm indoor light, shadows, and beside neighboring surfaces. Placement, sheen, and substrate texture can all change the way the finished item looks.

If the part will be installed next to an existing painted surface or under fixed lighting, confirm the color in that same environment before you finish the full project. That is the safest way to reduce surprises on visible items.

For MyPerfectColor spray paint matched to Sherwin-Williams SW9615 Prospect, expect it to be dry to touch within minutes, ready to recoat in about 1 to 2 hours, and fully cured in about two weeks.

Dry to touch, recoat, and full cure are different stages. Do not handle, stack, or assemble the part as if it is fully finished just because the surface feels dry. Give it the full cure time if the item will be installed, shipped, or exposed to wear.

The SDS is tied to the exact MyPerfectColor product or chemistry, not to SW9615 Prospect by color name alone. If you are buying this color in a specific MyPerfectColor format, use the SDS for that product.

For this color, MyPerfectColor Safety Data Sheets are listed here: https://www.myperfectcolor.com/Safety-Data-Sheets/33970.htm

Yes, but plastics vary widely, so testing on the actual part is important. MyPerfectColor spray paint sticks well to most plastics, but some materials need different prep to get reliable adhesion.

If the plastic is difficult or the part will be handled a lot, use the MyPerfectColor primer to improve adhesion before applying the color match. The primer information is here: https://www.myperfectcolor.com/en/product/995031-Primer-for-Acrylic-Enamel/. This is especially useful for small plastic items such as vents, covers, brackets, and similar parts.

MyPerfectColor has an original sample of the Sherwin Williams SW9615 Prospect in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams SW9615 Prospect. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams SW9615 Prospect, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.