70% of Orders Ship within 3 Business Days.
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
70% of Orders Ship within 3 Business Days.
Ready to purchase? Select your options in the 4 steps below.
A match of Prismatic Powders PSS-4774 Alpine Grey is a muted, cool gray with a slight blue-green cast. The low chroma keeps it quiet rather than bright, and the mid-light LRV gives it a medium presence that can read a little deeper on textured or higher-gloss coated surfaces.
For touch-up after transportation damage, installation damage, fabrication work, service damage, or missed spots in the original powder-coated finish, this color can be used on frames, brackets, enclosures, railings, vent covers, screw heads, trim plugs, and other ancillary parts that need to blend with a coated assembly. MyPerfectColor custom spray paint precisely matches the color and finish, making it suitable for replacement parts, sample panels, and field-made details where close coordination is needed.
Because this is a low-chroma gray, it usually covers in a controlled way, but finish variables still matter. Film build, substrate, sheen, and surface texture can change how the color reads, and a small repair beside an existing cured finish may still show a difference in gloss or edge clarity. On lighter or uneven substrates, coverage and contrast should be checked carefully before committing to a final repair.
Similar colors:
PSB-4829 Flat Texas Grey
PSB-8080 Flat Willow Grey
PSS-2625 Texas Grey II
Prismatic Powders, founded in 1984 by NIC Industries, is located in White City, Oregon. Prismatic Powders offers the largest selection of powder coating colors in the world, claiming the development of over 6,500 different colors and finishes. Prismatic Powders also offers a large array of specialty finishes and effects which makes it a popular choice for auto enthusiasts.
MyPerfectColor is able to match most of the Prismatic Powders paint colors so you can find and enjoy the colors you love. MyPerfectColor uses its expert capabilities to recreate the original Prismatic Powders color by matching the original Prismatic Powders color books and swatches. MyPerfectColor is not using Prismatic Powders coatings.
The colors shown on this website are computer video simulations of the Prismatic Powders Color and may not match Prismatic Powders Color standards. Refer to Prismatic Powders Publications to obtain an accurate color sample. Please know that MyPerfectColor is matching the original Prismatic Powders color. If you intend to touch up a coating, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
MyPerfectColor can precisely match Prismatic Powders PSS-4774 Alpine Grey, but an older cured part may still read differently from a fresh match. Gloss, texture, age, weathering, cure, substrate, and batch variation can all affect how the finish appears beside an existing part.
If the repair must blend into a visible installed finish, compare against the actual part or an approved sample when possible.
Yes. A match of Prismatic Powders PSS-4774 Alpine Grey is a good reference for touch-up after transportation damage, installation damage, fabrication damage, drilled holes, cut edges, field modifications, or missed spots in the original coating process.
MyPerfectColor precisely matches the color and finish for the repair, so you can order a touch-up format that fits the part and the size of the area you need to fix.
Yes. A match of Prismatic Powders PSS-4774 Alpine Grey is commonly used as a match for ancillary items such as screw heads, rivet heads, trim plugs, end caps, clips, covers, fastener hardware, brackets, and similar small parts that cannot go through the original coating process.
Ordering MyPerfectColor paint matched to this reference helps those parts coordinate with the coated assembly without needing the original finish process.
Not always. Even when the color reference is correct, a liquid touch-up matched to Prismatic Powders PSS-4774 Alpine Grey can still look different from the original cured powder-coated finish because of gloss, texture, film build, substrate, cure, and age.
If you need the closest side-by-side result, compare the order against the actual coated part or a sample panel, especially on a visible finish.
For repeat work, order by the exact brand color name and code: Prismatic Powders PSS-4774 Alpine Grey. Keep the same finish reference, and use the same substrate and prep method whenever possible.
That approach improves consistency across related parts, but final appearance can still shift with surface prep, surrounding part age, and the difference between a fresh match and an existing cured finish.
Yes, you can use the acrylic enamel paint as a touch up for the Prismatic Powders PSS-4774 Alpine Grey coating. MyPerfectColor precisely matches the color and sheen of the official Prismatic Powders color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.
Learn more about our color matching services.
To make touch up paint for the Prismatic Powders PSS-4774 Alpine Grey, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.
MyPerfectColor acrylic enamel paint matching the Prismatic Powders PSS-4774 Alpine Grey will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Prismatic Powders metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.
MyPerfectColor has the original Prismatic Powders PSS-4774 Alpine Grey sample in our color archive. We are able to make paint and verify that it matches the original.
Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.
MyPerfectColor matches the Prismatic Powders PSS-4774 Alpine Grey by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.