Match of Prismatic Powders™ PSS-2760 Patrick Bronze *

MyPerfectColor precisely matches the color and finish for PSS-2760 Patrick Bronze, but an older or already cured coated part can still read differently beside fresh paint. Gloss, texture, age, weathering, cure, substrate, and batch variation can all affect how the finish looks in real use.

If the area will be viewed next to the original part, it is safer to compare against the actual coated part or an approved sample before ordering a visible touch-up.

Yes. A match of Prismatic Powders PSS-2760 Patrick Bronze is a practical reference for touch-up paint when a coated part has chips, scratches, rub marks, transport damage, installation damage, fabrication damage, drilled areas, cut edges, or missed spots in the original finish.

MyPerfectColor custom-matched paint is made to precisely match the color and finish so you can repair the damaged area without switching to a different color reference. For best results, clean the area well and apply only to the damaged section that needs correction.

Yes. A match of Prismatic Powders PSS-2760 Patrick Bronze is often used as a color reference for ancillary items such as screw heads, clips, trim plugs, end caps, brackets, covers, and plastic snaps that cannot go through the original coating process but still need to coordinate with the assembly.

For these smaller parts, MyPerfectColor paint matched to PSS-2760 Patrick Bronze is a better fit when the goal is visual coordination rather than reproducing the full original coating process on the part itself.

Even when the color reference is correct, a fresh liquid application of PSS-2760 Patrick Bronze can still look different from the original cured finish. The original part may have its own gloss, texture, film build, cure behavior, and age-related changes that affect how it reads in daylight and under shop lighting.

That is why MyPerfectColor precisely matches the color and finish, but a side-by-side result on an existing coated part is not guaranteed to be identical in every detail. If the match must hold up under close visual comparison, use an actual part or approved sample as the reference whenever possible.

For PSS-2760 Patrick Bronze, start with a clean, dry surface and remove grease, dust, and loose contamination before painting. Light scuffing may help on some previously coated parts, but the right prep depends on the substrate and the condition of the surface.

Metal, plastic, and existing coatings do not all behave the same, so primer choice and adhesion prep should match the material you are coating. If the part is important or the finish is hard to access later, test adhesion on a small area before committing to the full repair.

Yes, you can use the acrylic enamel paint as a touch up for the Prismatic Powders PSS-2760 Patrick Bronze coating. MyPerfectColor precisely matches the color and sheen of the official Prismatic Powders color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

To make touch up paint for the Prismatic Powders PSS-2760 Patrick Bronze, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

MyPerfectColor acrylic enamel paint matching the Prismatic Powders PSS-2760 Patrick Bronze will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Prismatic Powders metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

MyPerfectColor has the original Prismatic Powders PSS-2760 Patrick Bronze sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the Prismatic Powders PSS-2760 Patrick Bronze by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.