Match of Prismatic Powders™ PSS-1395 Federation Brown *

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

A match of Prismatic Powders PSS-1395 Federation Brown reads as a very dark brown with a gray cast and low chroma, so it looks quiet rather than vivid. Its low lightness gives it a near-charcoal depth, while the slight warmth keeps it from reading as a flat black.

This is a practical match for touch-up after transportation damage, installation damage, fabrication work, service damage, or missed spots in the original finish. MyPerfectColor precisely matches the color and finish, making it useful for powder-coated brackets, enclosures, railings, frames, vents, screw heads, end caps, and other ancillary parts that need to blend with a coated assembly.

Because the color is dark and muted, small repairs can still show differences in sheen, texture, or edge build beside an older cured finish even when the color match is correct. Film build, substrate color, and surface preparation can all affect how deep or even the repair reads, especially on worn or weathered parts.

For separate replacement parts, sample panels, fabricated add-ons, or field-installed hardware, this kind of low-chroma brown-gray can be easier to coordinate than a brighter or more saturated color. It is a measured finish for industrial parts where the main goal is close color-and-finish alignment rather than a color that draws attention to the repair.

Product Data

See Technical Data Sheets
See Safety Data Sheets

About PRISMATIC POWDERS Coatings

Prismatic Powders, founded in 1984 by NIC Industries, is located in White City, Oregon. Prismatic Powders offers the largest selection of powder coating colors in the world, claiming the development of over 6,500 different colors and finishes. Prismatic Powders also offers a large array of specialty finishes and effects which makes it a popular choice for auto enthusiasts.

Matching Prismatic Powders Paint Colors

MyPerfectColor is able to match most of the Prismatic Powders paint colors so you can find and enjoy the colors you love. MyPerfectColor uses its expert capabilities to recreate the original Prismatic Powders color by matching the original Prismatic Powders color books and swatches. MyPerfectColor is not using Prismatic Powders coatings.

The colors shown on this website are computer video simulations of the Prismatic Powders Color and may not match Prismatic Powders Color standards. Refer to Prismatic Powders Publications to obtain an accurate color sample. Please know that MyPerfectColor is matching the original Prismatic Powders color. If you intend to touch up a coating, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.

If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.

Frequently Asked Questions About Match of Prismatic Powders™ PSS-1395 Federation Brown *

Will PSS-1395 Federation Brown match an existing cured finish exactly?

MyPerfectColor precisely matches the color and finish for PSS-1395 Federation Brown, but an older cured part can still read differently from a fresh repair.

Gloss, texture, age, weathering, cure, substrate, and batch variation can all change how the finish looks next to the original part. If you need the closest side-by-side decision for an existing coated piece, compare against the actual part or an approved sample when possible.

Can I use PSS-1395 Federation Brown for touch-up after transport damage, installation damage, or missed spots?

Yes. A match of Prismatic Powders PSS-1395 Federation Brown is a practical choice for touch-up after chips, scratches, rub marks, handling damage, transport damage, installation damage, fabrication damage, drilled holes, cut edges, field modifications, or missed spots in the original finish.

MyPerfectColor precisely matches the color and finish, so you can order a matched touch-up product for the repair size and application method you need. For small repairs, this is often the right starting point. For a large visible repair beside an older cured finish, the surrounding gloss and texture still matter.

Is PSS-1395 Federation Brown a good match for plastic snaps, screw heads, or other ancillary hardware?

Yes. A match of Prismatic Powders PSS-1395 Federation Brown can be used to coordinate ancillary items such as plastic snaps, screw heads, rivet heads, trim plugs, end caps, clips, covers, fastener hardware, and brackets with a coated assembly.

These parts usually cannot go through the same original coating process, so a matched paint is the practical option when the goal is close color coordination with the surrounding finish. MyPerfectColor offers a match of PSS-1395 Federation Brown for that kind of separate-part work.

If I order PSS-1395 Federation Brown as liquid paint, will it look identical to the powder-coated original?

Not necessarily. MyPerfectColor custom-matched paint precisely matches the color and finish, but a liquid repair can still read differently beside a cured powder-coated part.

The original finish may have its own gloss, texture, film build, and age, so a fresh liquid application is not the same as the original coating system. Use the matched paint for touch-up, replacement parts, samples, or coordination work, and use an existing part or approved panel when you need tighter side-by-side comparison.

How do gloss and texture affect PSS-1395 Federation Brown after application?

Gloss, texture, and film build can change how PSS-1395 Federation Brown looks after application even when the color match is correct.

A smooth, satin, or brushed-looking touch-up will not automatically read the same as a textured, matte, or other specialized coated surface. If the repair will sit next to an existing finish, it is safer to compare against the actual part or a sample panel when tight appearance matching matters.

How quickly will I receive my paint matched to Prismatic Powders PSS-1395 Federation Brown?

All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match Prismatic Powders PSS-1395 Federation Brown depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.

Can I use this as touch up paint for the Prismatic Powders PSS-1395 Federation Brown coating?

Yes, you can use the acrylic enamel paint as a touch up for the Prismatic Powders PSS-1395 Federation Brown coating. MyPerfectColor precisely matches the color and sheen of the official Prismatic Powders color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

What type of paint is used to make touch up for the Prismatic Powders PSS-1395 Federation Brown? And how much area will one can of spray paint cover?

To make touch up paint for the Prismatic Powders PSS-1395 Federation Brown, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

Will the paint match both the color and the sheen of the original Prismatic Powders PSS-1395 Federation Brown coating?

MyPerfectColor acrylic enamel paint matching the Prismatic Powders PSS-1395 Federation Brown will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Prismatic Powders metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

How does MyPerfectColor match paint to the Prismatic Powders PSS-1395 Federation Brown color?

MyPerfectColor has the original Prismatic Powders PSS-1395 Federation Brown sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the Prismatic Powders PSS-1395 Federation Brown by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.

Do I need a primer for Prismatic Powders PSS-1395 Federation Brown?

The need for primer for Prismatic Powders PSS-1395 Federation Brown depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.