Match of Prismatic Powders™ PSB-10001 Warm Stone *

MyPerfectColor precisely matches the color and finish for PSB-10001 Warm Stone, but an older cured part can still read differently from a fresh touch-up. Gloss, texture, age, weathering, cure, film build, substrate, and batch variation can all affect how the finish looks beside the existing part.

If the repaired area must blend into a visible cured finish, compare against the actual part or an approved sample before ordering.

Yes. A match of Prismatic Powders PSB-10001 Warm Stone is commonly used as touch-up paint for chips, scratches, rub marks, transport damage, installation damage, fabrication damage, drilled holes, cut edges, field modifications, and missed spots in the original finish.

MyPerfectColor matches the color and finish so you can repair the affected area without changing the rest of the coated part.

Yes. A match of Prismatic Powders PSB-10001 Warm Stone is often used on ancillary items and small hardware that need to coordinate with a coated assembly, including screw heads, rivet heads, clips, covers, trim plugs, end caps, and similar parts.

These parts cannot always go through the same original coating process, so a color-matched paint is useful when the goal is close coordination with the surrounding finish.

Not always. Even when the color reference for PSB-10001 Warm Stone is correct, a fresh liquid touch-up can still look different next to the original cured finish because of gloss, texture, film build, age, cure, substrate, and light.

This is why MyPerfectColor precisely matches the color and finish, but the repaired area may still not read exactly like the surrounding coated part in every situation.

Prep depends on the substrate. For PSB-10001 Warm Stone, clean and degrease the surface first, then scuff where appropriate so the coating can bond properly. Bare metal, plastic, and previously coated parts do not behave the same, so adhesion and primer needs can change by surface.

If you are repairing over an existing coating, make sure the old finish is sound before painting. If the part is bare or slick plastic, primer may be needed for better adhesion.

Yes, you can use the acrylic enamel paint as a touch up for the Prismatic Powders PSB-10001 Warm Stone coating. MyPerfectColor precisely matches the color and sheen of the official Prismatic Powders color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

To make touch up paint for the Prismatic Powders PSB-10001 Warm Stone, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

MyPerfectColor acrylic enamel paint matching the Prismatic Powders PSB-10001 Warm Stone will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Prismatic Powders metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

MyPerfectColor has the original Prismatic Powders PSB-10001 Warm Stone sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the Prismatic Powders PSB-10001 Warm Stone by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.