Match of Prismatic Powders™ PSB-8152 Black Bruise *

MyPerfectColor precisely matches the color and finish of PSB-8152 Black Bruise, but an older cured part can still read a little differently in use. Gloss, texture, age, weathering, cure, substrate, and batch variation can all affect how the finished part looks next to the original coating.

If the repair must blend beside an existing part, the safest approach is to compare against the actual coated part or an approved sample, not just the color name alone.

Yes. A match of Prismatic Powders PSB-8152 Black Bruise is the kind of coating reference that is commonly used for touch-up after transportation damage, installation damage, fabrication damage, field modification damage, or missed spots in the original finish.

Order the MyPerfectColor touch-up product matched to PSB-8152 Black Bruise when you need to repair chips, scratches, rub marks, or uncovered areas on coated parts.

Yes. A match of Prismatic Powders PSB-8152 Black Bruise can be used to coordinate ancillary items such as plastic snaps, screw heads, rivet heads, trim plugs, end caps, clips, covers, and small brackets that cannot go through the original coating process.

For these parts, the goal is close color coordination with the coated assembly. Surface prep and primer choice matter because these small parts do not all behave the same way.

Not always. Even when MyPerfectColor precisely matches the color and finish of PSB-8152 Black Bruise, a fresh liquid touch-up can still look different beside an older cured part because of gloss, texture, film build, substrate, and cure behavior.

Use the color reference as the correct starting point, but avoid assuming a liquid touch-up will read exactly like the original cured finish in every lighting condition or at every viewing angle.

Start by cleaning and degreasing the surface, then use light scuffing where appropriate to help the new coating bond. Bare metal, plastic, and previously coated parts can all need different prep steps, so the substrate matters.

If the part is bare, slick, or hard to bond to, primer may be needed before applying the PSB-8152 Black Bruise match. Good prep is important for adhesion and for getting a consistent result.

Yes, you can use the acrylic enamel paint as a touch up for the Prismatic Powders PSB-8152 Black Bruise coating. MyPerfectColor precisely matches the color and sheen of the official Prismatic Powders color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

To make touch up paint for the Prismatic Powders PSB-8152 Black Bruise, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

MyPerfectColor acrylic enamel paint matching the Prismatic Powders PSB-8152 Black Bruise will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Prismatic Powders metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

MyPerfectColor has the original Prismatic Powders PSB-8152 Black Bruise sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the Prismatic Powders PSB-8152 Black Bruise by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.