Match of Prismatic Powders™ PSB-8051 Dirty White *

MyPerfectColor precisely matches the color and finish of PSB-8051 Dirty White, but an older cured part can still read differently from a fresh repair. Gloss, texture, film build, age, weathering, cure, substrate, and batch variation can all change how the finish looks beside an existing part.

If your goal is a side-by-side match on an installed or weathered piece, compare against the actual part or an approved sample whenever possible.

Yes. A match of Prismatic Powders PSB-8051 Dirty White is a common touch-up reference for chips, scratches, rub marks, drilled holes, cut edges, handling damage, transport damage, installation damage, fabrication damage, and missed spots in the original finish.

For small repairs, a matched touch-up product is usually the right choice. For a larger visible area next to an existing cured finish, expect that sheen and texture differences can still be noticeable even when the color match is correct.

Yes. A match of Prismatic Powders PSB-8051 Dirty White is often used to coordinate small ancillary parts that cannot go through the original coating process, such as screw heads, rivet heads, clips, trim plugs, end caps, covers, fastener hardware, and similar items.

For small parts, the main decision is usually format and substrate. Touch-up paint, spray paint, or paint pens can be useful depending on the part size and the level of control needed. Clean and degrease the part first, and test on the actual substrate before finishing the full set.

No guarantee. A match of Prismatic Powders PSB-8051 Dirty White is a coating color reference, and MyPerfectColor can make a match of PSB-8051 Dirty White in a liquid paint format, but a liquid touch-up can still read differently beside the original cured finish.

That difference can come from gloss, texture, metallic or effect behavior, film build, substrate, and how the original part was cured. If you need the best side-by-side decision, compare the match to the actual coated part or an approved sample, not only to the color name.

Reorder by the exact brand color name, PSB-8051 Dirty White, and keep the same product format when possible. MyPerfectColor can provide PSB-8051 Dirty White in touch-up paint, custom spray paint, paint pens, and other formats for factory-finish coordination.

For consistent results, keep the substrate and prep process as similar as possible and account for the age of the existing finish. If the new work must blend with an installed part, a sample or the actual part is still the safest reference.

Yes, you can use the acrylic enamel paint as a touch up for the Prismatic Powders PSB-8051 Dirty White coating. MyPerfectColor precisely matches the color and sheen of the official Prismatic Powders color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

To make touch up paint for the Prismatic Powders PSB-8051 Dirty White, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

MyPerfectColor acrylic enamel paint matching the Prismatic Powders PSB-8051 Dirty White will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Prismatic Powders metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

MyPerfectColor has the original Prismatic Powders PSB-8051 Dirty White sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the Prismatic Powders PSB-8051 Dirty White by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.