Match of Prismatic Powders™ PSB-5986 Bend Brown *

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

A match of Prismatic Powders PSB-5986 Bend Brown is a muted medium brown with a warm, earthy cast and low chroma. It sits in the darker midrange, so it reads as a subdued brown rather than a bright red-brown, with a slight yellow-olive bias that keeps it from looking flat or muddy.

For Prismatic Powders powder-coated part touch-up after transportation damage, installation damage, fabrication work, service damage, or missed spots, this color can work on frames, brackets, railings, enclosures, housings, panels, and trim. It also fits smaller ancillary items such as screw heads, clips, trim plugs, end caps, and hardware that need to coordinate with a coated assembly. MyPerfectColor precisely matches the color and finish for these uses.

Because this is a muted brown with moderate depth, it usually does not bring the same hide concerns as a vivid color, but substrate color, film build, and finish still affect the result. On smooth metal, repaired edges and sheen differences can stand out beside an older cured finish, so a fresh touch-up may read differently than the original powder-coated surface even when the color reference is correct.

When matching an existing part, the reference color and finish are the starting point, but age, weathering, cure history, and surface texture can shift the way the installed piece looks. For that reason, the closest result is often easiest to judge on a replacement part, sample panel, or separate fabricated component rather than on a worn or weathered finish.

Product Data

See Technical Data Sheets
See Safety Data Sheets

About PRISMATIC POWDERS Coatings

Prismatic Powders, founded in 1984 by NIC Industries, is located in White City, Oregon. Prismatic Powders offers the largest selection of powder coating colors in the world, claiming the development of over 6,500 different colors and finishes. Prismatic Powders also offers a large array of specialty finishes and effects which makes it a popular choice for auto enthusiasts.

Matching Prismatic Powders Paint Colors

MyPerfectColor is able to match most of the Prismatic Powders paint colors so you can find and enjoy the colors you love. MyPerfectColor uses its expert capabilities to recreate the original Prismatic Powders color by matching the original Prismatic Powders color books and swatches. MyPerfectColor is not using Prismatic Powders coatings.

The colors shown on this website are computer video simulations of the Prismatic Powders Color and may not match Prismatic Powders Color standards. Refer to Prismatic Powders Publications to obtain an accurate color sample. Please know that MyPerfectColor is matching the original Prismatic Powders color. If you intend to touch up a coating, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.

If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.

Frequently Asked Questions About Match of Prismatic Powders™ PSB-5986 Bend Brown *

Will MyPerfectColor PSB-5986 Bend Brown match an older cured Prismatic Powders finish exactly?

MyPerfectColor precisely matches the color and finish for PSB-5986 Bend Brown, but an older cured part may still not read exactly the same as a fresh repair. Gloss, texture, age, weathering, cure, substrate, and batch variation can all change how the finish looks next to an existing coated part. If the repair must blend beside a visible cured surface, compare against the actual part or an approved sample whenever possible.

Can PSB-5986 Bend Brown be used to repair chips, scratches, or missed spots on a coated part?

Yes. A match of Prismatic Powders PSB-5986 Bend Brown is commonly ordered as MyPerfectColor touch-up paint for chips, scratches, rub marks, transport damage, installation damage, fabrication damage, drilled holes, cut edges, field modifications, and missed spots in the original finish. It is meant for repair and coordination work, not for replacing the original coating process.

Can PSB-5986 Bend Brown be used on plastic snaps, screw heads, trim plugs, or other hardware that cannot be powder coated?

Yes. For plastic snaps, screw heads, rivet heads, trim plugs, end caps, clips, covers, brackets, and similar ancillary parts, MyPerfectColor can match PSB-5986 Bend Brown so the item coordinates with the coated assembly. Choose the format that fits the part and the application, such as touch-up paint, spray paint, or paint pens.

Will a liquid touch-up for Prismatic Powders PSB-5986 Bend Brown look the same as the original powder-coated finish?

Not always. Even when the color reference is correct, a liquid touch-up for PSB-5986 Bend Brown can still look different beside a cured powder-coated part because gloss, texture, film build, cure, surface prep, and age all affect appearance. MyPerfectColor precisely matches the color and finish, but a fresh repair is still a different application than the original coated surface.

How should I reorder PSB-5986 Bend Brown if I need consistent color across multiple parts?

Reorder using the exact brand color name and code, PSB-5986 Bend Brown by Prismatic Powders, and keep the same product format and finish for each related part. That gives you the best chance of consistent results across the job. Final appearance can still shift with substrate, prep, and whether you are matching a fresh part or an older cured finish, so keep an approved sample or reference part when tight color coordination matters.

How quickly will I receive my paint matched to Prismatic Powders PSB-5986 Bend Brown?

All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match Prismatic Powders PSB-5986 Bend Brown depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.

Can I use this as touch up paint for the Prismatic Powders PSB-5986 Bend Brown coating?

Yes, you can use the acrylic enamel paint as a touch up for the Prismatic Powders PSB-5986 Bend Brown coating. MyPerfectColor precisely matches the color and sheen of the official Prismatic Powders color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

What type of paint is used to make touch up for the Prismatic Powders PSB-5986 Bend Brown? And how much area will one can of spray paint cover?

To make touch up paint for the Prismatic Powders PSB-5986 Bend Brown, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

Will the paint match both the color and the sheen of the original Prismatic Powders PSB-5986 Bend Brown coating?

MyPerfectColor acrylic enamel paint matching the Prismatic Powders PSB-5986 Bend Brown will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Prismatic Powders metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

How does MyPerfectColor match paint to the Prismatic Powders PSB-5986 Bend Brown color?

MyPerfectColor has the original Prismatic Powders PSB-5986 Bend Brown sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the Prismatic Powders PSB-5986 Bend Brown by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.

Do I need a primer for Prismatic Powders PSB-5986 Bend Brown?

The need for primer for Prismatic Powders PSB-5986 Bend Brown depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.