70% of Orders Ship within 3 Business Days.
Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.
70% of Orders Ship within 3 Business Days.
Ready to purchase? Select your options in the 4 steps below.
A match of Cerakote Matte Brown H-7504 is a muted, medium brown with a warm, slightly earthy cast and low chroma. The matte appearance keeps it from reading glossy or vivid, so the color comes across as a subdued brown with moderate depth rather than a clean neutral or a reddish tone.
For coated-part repair and fabrication work, this is a practical choice for touch-up after transportation damage, installation damage, service marks, drilling, or missed coverage on finished parts. MyPerfectColor precisely matches the color and finish, making it a practical match for custom spray paint on brackets, enclosures, railings, hardware covers, trim plugs, screw heads, and other ancillary items that need to coordinate with a Cerakote-coated assembly.
Because the color is relatively low-chroma, it often covers more predictably than brighter coatings, but the matte finish can still make surface prep, film build, and substrate contrast visible. A lighter or uneven substrate can show through more readily, and a sprayed repair beside a cured finish can read differently if the original part has a different sheen, texture, or wear pattern.
When the work is going onto a replacement part, sample panel, or small fabricated detail, the color reference is usually enough to keep the finish aligned with the original specification. For an older installed part, the safest expectation is close color and finish matching rather than a guarantee that every aged surface will blend without a visible transition.
Similar colors:
Mud Brown H-225
Coyote Tan H-235
Noveske Tiger Eye Brown H-187
Cerakote® is the world leader in firearm coatings. Since 1984, Cerakote has focused on developing and manufacturing ceramic coatings which are used by more firearm manufacturers than any other firearm coating.
MyPerfectColor is able match most of the Cerakote paint colors in touch up paint. MyPerfectColor uses its expert capabilities to precisely match the color and sheen of the original Cerakote color by matching the original Cerakote swatches (when purchasing spray paint, paint pens and brush in cap bottles). MyPerfectColor is not using Cerakote paint.
The colors shown on this website are computer video simulations of the Cerakote Color and may not match Cerakote Color standards. Refer to Cerakote Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original Cerakote color. If you intend to touch up paint that is old, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.
If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.
MyPerfectColor precisely matches the color and finish for Cerakote Matte Brown H-7504, but that does not guarantee a side-by-side match to an older cured part.
Gloss, texture, cure, age, weathering, substrate, film build, and batch variation can all make an existing finish read differently from a fresh touch-up. If the part is already installed and highly visible, compare against the actual finished part or an approved sample before ordering.
Yes. A match of Cerakote Matte Brown H-7504 is commonly used as touch-up paint for chips, scratches, rub marks, transportation damage, installation damage, fabrication damage, drilled holes, cut edges, field modifications, and missed spots in the original finish.
MyPerfectColor precisely matches the color and finish so you can repair the affected area with the correct reference, while still accounting for the fact that a repair next to a cured finish may not read exactly the same in every light.
Yes. A match of Cerakote Matte Brown H-7504 is often used to coordinate ancillary items such as plastic snaps, screw heads, rivet heads, trim plugs, end caps, clips, covers, fastener hardware, and small brackets that cannot go through the original coating process.
MyPerfectColor precisely matches the color and finish so these separate parts can blend with the surrounding coated assembly as closely as possible.
MyPerfectColor precisely matches the color and finish of Cerakote Matte Brown H-7504, but a fresh liquid touch-up can still look different beside an original cured finish.
The original part may have its own gloss, texture, cure, film build, substrate, and age effects. That means the color reference can be correct while the installed part still reads differently when viewed next to an older coated surface.
Before ordering Cerakote Matte Brown H-7504, confirm the exact brand color, the finish expectation, the product format you need, and the quantity you want to order.
Custom-made color matches should be checked carefully before purchase because they are not returnable or refundable.
Yes, you can use the acrylic enamel paint as a touch up for the Cerakote Matte Brown H-7504 coating. MyPerfectColor precisely matches the color and sheen of the official Cerakote color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.
Learn more about our color matching services.
To make touch up paint for the Cerakote Matte Brown H-7504, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.
MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.
MyPerfectColor acrylic enamel paint matching the Cerakote Matte Brown H-7504 will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Cerakote metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.
MyPerfectColor has the original Cerakote Matte Brown H-7504 sample in our color archive. We are able to make paint and verify that it matches the original.
Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.
MyPerfectColor matches the Cerakote Matte Brown H-7504 by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.