Match of Cerakote™ Flat Dark Earth H-265 *

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

A match of Cerakote Flat Dark Earth H-265 is a dark, muted earth brown with a warm khaki-brown undertone and low chroma. At an LRV of 15.28, it reads fairly deep rather than pale, with a subdued character that sits between brown, tan, and olive-brown.

Use MyPerfectColor precisely matches the color and finish for touch-up after transportation damage, installation damage, fabrication work, service damage, or missed coverage on Cerakote-coated parts. It is a practical option for brackets, frames, housings, enclosures, access panels, railings, and other fabricated parts, as well as screw heads, washers, trim plugs, end caps, clips, and fastener covers that need to coordinate with the surrounding finish.

Because this is a dark, low-chroma color, small color differences are usually less obvious than with a vivid shade, but sheen, film build, and surface texture can still change how it reads on the part. A fresh liquid touch-up may also show edges or repair boundaries more clearly beside an aged cured finish, so close color-and-finish matching matters most when the existing part is already weathered or when the tolerance is tight.

Product Data

See Technical Data Sheets
See Safety Data Sheets

About Cerakote Paint

Cerakote® is the world leader in firearm coatings. Since 1984, Cerakote has focused on developing and manufacturing ceramic coatings which are used by more firearm manufacturers than any other firearm coating.

Matching Cerakote Paint Colors

MyPerfectColor is able match most of the Cerakote paint colors in touch up paint. MyPerfectColor uses its expert capabilities to precisely match the color and sheen of the original Cerakote color by matching the original Cerakote swatches (when purchasing spray paint, paint pens and brush in cap bottles). MyPerfectColor is not using Cerakote paint.

The colors shown on this website are computer video simulations of the Cerakote Color and may not match Cerakote Color standards. Refer to Cerakote Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original Cerakote color. If you intend to touch up paint that is old, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.

If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.

Frequently Asked Questions About Match of Cerakote™ Flat Dark Earth H-265 *

Will Cerakote Flat Dark Earth H-265 match an already cured part exactly?

MyPerfectColor precisely matches the color and finish, but an older or already cured part can still read differently from a fresh repair. Gloss, texture, age, weathering, cure, film build, substrate, and batch variation can all affect how Cerakote Flat Dark Earth H-265 appears beside an existing finish. If the repaired area will sit next to a visible cured surface, an existing part or approved sample panel is the safer reference.

Is Cerakote Flat Dark Earth H-265 a good choice for touch-up after damage or missed spots?

Yes. A match of Cerakote Flat Dark Earth H-265 is commonly ordered as touch-up paint for chips, scratches, rub marks, transportation damage, installation damage, fabrication damage, drilled holes, cut edges, field modifications, and missed spots in the original finish. Order MyPerfectColor paint matched to this color reference, then choose the format that fits the repair size and application method.

Can Cerakote Flat Dark Earth H-265 be used on screw heads, plastic snaps, or trim plugs that were not finish-coated originally?

Yes. A match of Cerakote Flat Dark Earth H-265 is often used to coordinate ancillary items such as screw heads, plastic snaps, rivet heads, trim plugs, end caps, clips, covers, brackets, and other small parts that cannot go through the same original coating process. In those cases, you are matching the visible color reference so the added part blends with the coated assembly as closely as possible.

Will a liquid paint match of Cerakote Flat Dark Earth H-265 look identical to the original cured finish?

Not always. Even when MyPerfectColor precisely matches the color and finish, a fresh liquid touch-up can still read differently next to an older cured finish because the original part may have different gloss, texture, cure, film build, and surface wear. That is why Cerakote Flat Dark Earth H-265 is best treated as a precise color reference for touch-up and coordination, not as a guarantee of identical appearance on every existing part.

Should I use an existing part or sample to match Cerakote Flat Dark Earth H-265?

Use an existing coated part or approved sample panel when the match is highly visible, the tolerance is tight, or the finish has texture or other effect characteristics that matter. The Cerakote Flat Dark Earth H-265 code is a good starting point for ordering, but an actual part or sample gives the best reference when you need to check how the color reads on the real surface and under the same lighting.

How quickly will I receive my paint matched to Cerakote Flat Dark Earth H-265?

All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match Cerakote Flat Dark Earth H-265 depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.

Can I use this as touch up paint for the Cerakote Flat Dark Earth H-265 coating?

Yes, you can use the acrylic enamel paint as a touch up for the Cerakote Flat Dark Earth H-265 coating. MyPerfectColor precisely matches the color and sheen of the official Cerakote color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

What type of paint is used to make touch up for the Cerakote Flat Dark Earth H-265? And how much area will one can of spray paint cover?

To make touch up paint for the Cerakote Flat Dark Earth H-265, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

Will the paint match both the color and the sheen of the original Cerakote Flat Dark Earth H-265 coating?

MyPerfectColor acrylic enamel paint matching the Cerakote Flat Dark Earth H-265 will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Cerakote metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

How does MyPerfectColor match paint to the Cerakote Flat Dark Earth H-265 color?

MyPerfectColor has the original Cerakote Flat Dark Earth H-265 sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the Cerakote Flat Dark Earth H-265 by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.

Do I need a primer for Cerakote Flat Dark Earth H-265?

The need for primer for Cerakote Flat Dark Earth H-265 depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.