Match of Cerakote™ Sniper Grey H-234 *

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

A match of Cerakote Sniper Grey H-234 is a dark gray with very low chroma, reading as a cool, slightly blue-leaning neutral rather than a warm charcoal. With an LRV around 10, it sits in the deep end of the scale and can look softer or more solid depending on sheen and substrate.

This color works well for touch-up after transportation damage, installation damage, fabrication work, service damage, or missed spots in the original finish on coated metal parts. MyPerfectColor precisely matches the color and finish, making it a practical choice for spray-painting brackets, screw heads, trim plugs, end caps, vent covers, enclosures, rails, and other small fabricated details that need to coordinate with a Cerakote-coated assembly.

Because the color is dark and fairly neutral, it usually does not struggle with hiding the way very light colors can, but it can still show surface prep, edge definition, gloss shift, and texture differences on a repaired area. On small touch-up work, a fresh spray can match the reference color well while a cured existing part may still read a little differently if the original finish has aged or if the film build is not the same.

That distinction matters most when you are matching an installed part beside an older cured finish. For replacement parts, prototypes, sample panels, and ancillary items that were never in the original coating cycle, this color reference is often the right starting point; for tight side-by-side repair work, an existing sample or the actual coated part can give a more reliable target for gloss and texture.

Product Data

See Technical Data Sheets
See Safety Data Sheets

About Cerakote Paint

Cerakote® is the world leader in firearm coatings. Since 1984, Cerakote has focused on developing and manufacturing ceramic coatings which are used by more firearm manufacturers than any other firearm coating.

Matching Cerakote Paint Colors

MyPerfectColor is able match most of the Cerakote paint colors in touch up paint. MyPerfectColor uses its expert capabilities to precisely match the color and sheen of the original Cerakote color by matching the original Cerakote swatches (when purchasing spray paint, paint pens and brush in cap bottles). MyPerfectColor is not using Cerakote paint.

The colors shown on this website are computer video simulations of the Cerakote Color and may not match Cerakote Color standards. Refer to Cerakote Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original Cerakote color. If you intend to touch up paint that is old, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.

If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.

Frequently Asked Questions About Match of Cerakote™ Sniper Grey H-234 *

Will MyPerfectColor paint matched to Cerakote Sniper Grey H-234 look exactly like my cured existing part?

MyPerfectColor precisely matches the color and finish for Cerakote Sniper Grey H-234, but a fresh repair can still read differently next to an older cured finish. Gloss, texture, age, weathering, cure, substrate, and batch variation can all change how the part looks in use. If the area you are matching is already installed and visible, the safest choice is to compare against the part itself or an approved sample when available.

Is Cerakote Sniper Grey H-234 a good match for touch-up after damage or missed spots?

Yes. A match of Cerakote Sniper Grey H-234 is a practical touch-up reference when you need to repair chips, scratches, rub marks, transport damage, installation damage, fabrication damage, drilled holes, cut edges, field modifications, or missed spots in the original finish. Order MyPerfectColor paint matched to Cerakote Sniper Grey H-234 when you need the repair area to coordinate with the coated part. For the best result, make sure the damaged area is clean, sound, and fully prepped before coating.

Can Cerakote Sniper Grey H-234 be used for screw heads, plastic snaps, or other hardware?

Yes. A match of Cerakote Sniper Grey H-234 is often used to coordinate ancillary items that cannot go through the original coating process, such as screw heads, rivet heads, plastic snaps, trim plugs, end caps, clips, covers, fastener hardware, and small brackets. MyPerfectColor custom-matched paint lets those parts coordinate with the main assembly without implying they are the original coating material. If the part will be handled often, choose the format and prep method that fit the part size and substrate.

If Cerakote Sniper Grey H-234 is a liquid coating reference, will MyPerfectColor paint match the cured factory finish exactly?

MyPerfectColor can match Cerakote Sniper Grey H-234 as a color and finish reference, but a liquid touch-up can still look different from the original cured finish because the coated part may have its own gloss, texture, film build, and surface behavior. That difference is normal in side-by-side comparisons, especially on aged parts or effect finishes. Use the color reference when you are coating a separate part or doing a touch-up where close coordination matters more than reproducing every detail of the factory cure.

What should I confirm before ordering MyPerfectColor for Cerakote Sniper Grey H-234?

Confirm the exact brand color, the expected finish, the part you are coating, the quantity, and the application method before you place the order. Custom-made color matches for Cerakote Sniper Grey H-234 should be checked carefully because they are not returnable or refundable. If you need to compare against a part, sample, or approved panel, do that before ordering so you choose the right reference.

How quickly will I receive my paint matched to Cerakote Sniper Grey H-234?

All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match Cerakote Sniper Grey H-234 depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.

Can I use this as touch up paint for the Cerakote Sniper Grey H-234 coating?

Yes, you can use the acrylic enamel paint as a touch up for the Cerakote Sniper Grey H-234 coating. MyPerfectColor precisely matches the color and sheen of the official Cerakote color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

What type of paint is used to make touch up for the Cerakote Sniper Grey H-234? And how much area will one can of spray paint cover?

To make touch up paint for the Cerakote Sniper Grey H-234, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

Will the paint match both the color and the sheen of the original Cerakote Sniper Grey H-234 coating?

MyPerfectColor acrylic enamel paint matching the Cerakote Sniper Grey H-234 will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Cerakote metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

How does MyPerfectColor match paint to the Cerakote Sniper Grey H-234 color?

MyPerfectColor has the original Cerakote Sniper Grey H-234 sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the Cerakote Sniper Grey H-234 by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.

Do I need a primer for Cerakote Sniper Grey H-234?

The need for primer for Cerakote Sniper Grey H-234 depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.