Match of Cerakote™ Zombie Green H-168 *

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

A match of Cerakote Zombie Green H-168 is a medium-light yellow-green with an olive, slightly earthy cast. It reads muted rather than bright, with enough green strength to stand apart without looking neon or overly clean.

As a match of Cerakote Zombie Green H-168, MyPerfectColor precisely matches the color and finish for touch-up after transportation damage, installation damage, fabrication work, service damage, or missed spots in the original finish. It can also be used on replacement brackets, screw heads, trim plugs, end caps, clips, vents, guards, and other small fabricated details that need to stay aligned with the coated assembly.

This color has moderate depth, so it usually covers cleanly, but the yellow-green balance can still shift with substrate color, film build, and sheen. A fresh liquid repair may not read exactly like an aged cured finish beside it, because gloss and texture differences can make repair edges or boundaries more visible even when the color match is close.

For parts already in service, it is often more reliable to compare against the coated reference or an approved sample panel than against a weathered installed part, especially when finish consistency matters. MyPerfectColor custom spray paint and other touch-up formats are suited to coated parts, ancillary hardware, and fabrication work where close color and finish coordination is the goal.

Product Data

See Technical Data Sheets
See Safety Data Sheets

About Cerakote Paint

Cerakote® is the world leader in firearm coatings. Since 1984, Cerakote has focused on developing and manufacturing ceramic coatings which are used by more firearm manufacturers than any other firearm coating.

Matching Cerakote Paint Colors

MyPerfectColor is able match most of the Cerakote paint colors in touch up paint. MyPerfectColor uses its expert capabilities to precisely match the color and sheen of the original Cerakote color by matching the original Cerakote swatches (when purchasing spray paint, paint pens and brush in cap bottles). MyPerfectColor is not using Cerakote paint.

The colors shown on this website are computer video simulations of the Cerakote Color and may not match Cerakote Color standards. Refer to Cerakote Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original Cerakote color. If you intend to touch up paint that is old, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.

If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.

Frequently Asked Questions About Match of Cerakote™ Zombie Green H-168 *

Will MyPerfectColor paint matched to Cerakote Zombie Green H-168 blend exactly with my existing cured finish?

MyPerfectColor precisely matches the color and finish for Cerakote Zombie Green H-168, but a fresh touch-up can still read differently next to an older cured part. Gloss, texture, age, weathering, cure, substrate, and batch variation can all affect how the repaired area looks in real use. If the part is already installed and highly visible, compare against an existing coated sample or the actual part before ordering.

Can I use Cerakote Zombie Green H-168 for touch-up after shipping, installation, or fabrication damage?

Yes. A match of Cerakote Zombie Green H-168 is a good reference when you need touch-up paint after transportation damage, installation damage, fabrication damage, field drilling, cutting, welding, rubbed spots, chips, scratches, or missed coverage in the original finish. MyPerfectColor makes paint that precisely matches the color and finish so you can repair the damaged area without changing the entire part.

Can Cerakote Zombie Green H-168 be used on screw heads, clips, or other small ancillary parts?

Yes. A match of Cerakote Zombie Green H-168 is often used as a color reference for ancillary items such as screw heads, rivet heads, clips, covers, trim plugs, end caps, brackets, and similar parts that cannot go through the original coating process. MyPerfectColor custom-matched paint helps those parts coordinate with the coated assembly while keeping the same target color and finish in the areas that need to blend visually.

If I order a match to Cerakote Zombie Green H-168, will the liquid touch-up look identical to the cured finish?

Not always. Even when MyPerfectColor precisely matches Cerakote Zombie Green H-168, a liquid touch-up can still look different beside the original cured finish because the installed part may have its own gloss, texture, film build, and light response. This matters most when you are repairing a visible area on an older coated part. If exact side-by-side appearance is critical, use the actual part or an approved sample as the reference.

How do I keep repeat orders of Cerakote Zombie Green H-168 consistent across multiple parts?

For the best repeatability, reorder by the exact Cerakote Zombie Green H-168 name and use the same product format for all related parts. Keep the substrate, surface prep, and application method as consistent as possible, since those factors can change the final appearance even when the color match is correct. If you are coordinating several parts, order enough material at once so the same match is used across the whole job.

How quickly will I receive my paint matched to Cerakote Zombie Green H-168?

All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match Cerakote Zombie Green H-168 depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.

Can I use this as touch up paint for the Cerakote Zombie Green H-168 coating?

Yes, you can use the acrylic enamel paint as a touch up for the Cerakote Zombie Green H-168 coating. MyPerfectColor precisely matches the color and sheen of the official Cerakote color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

What type of paint is used to make touch up for the Cerakote Zombie Green H-168? And how much area will one can of spray paint cover?

To make touch up paint for the Cerakote Zombie Green H-168, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

Will the paint match both the color and the sheen of the original Cerakote Zombie Green H-168 coating?

MyPerfectColor acrylic enamel paint matching the Cerakote Zombie Green H-168 will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Cerakote metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

How does MyPerfectColor match paint to the Cerakote Zombie Green H-168 color?

MyPerfectColor has the original Cerakote Zombie Green H-168 sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the Cerakote Zombie Green H-168 by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.

Do I need a primer for Cerakote Zombie Green H-168?

The need for primer for Cerakote Zombie Green H-168 depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.