Looking for color by Hex, RGB, CMYK, or Lab?

Match of Cerakote™ Bright White H-140 *

Color Image

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

  • Image Code
  • HTML
  • URL
  • Direct Image Link
Copy below code in your post
Fast Shipping

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

A match of Cerakote Bright White H-140 is a very light off-white that reads close to white, with low saturation and a faint cool green cast. It has a clean, restrained look rather than a stark, blue-white appearance.

MyPerfectColor precisely matches the color and finish for touch-up after transportation damage, installation damage, fabrication work, field drilling, or missed spots in the original finish. It can also be used on replacement brackets, screw heads, clips, trim plugs, end caps, vent covers, rail components, enclosures, and sample panels when a coated part needs to coordinate with Cerakote Bright White H-140 without recoating the full assembly.

Because this is a very light color, darker substrate color, repair edges, or uneven prep can show through more readily if coverage is thin. On an existing cured coated finish, gloss, texture, film build, and age can still affect how close the repair reads, so a matched liquid touch-up may not disappear into every installed part in the same way as the original finish.

Similar colors:

Arctic F-125
Stormtrooper White H-297
Snow White H-136

Product Data

About Cerakote Paint

Cerakote® is the world leader in firearm coatings. Since 1984, Cerakote has focused on developing and manufacturing ceramic coatings which are used by more firearm manufacturers than any other firearm coating.

Matching Cerakote Paint Colors

MyPerfectColor is able match most of the Cerakote paint colors in touch up paint. MyPerfectColor uses its expert capabilities to precisely match the color and sheen of the original Cerakote color by matching the original Cerakote swatches (when purchasing spray paint, paint pens and brush in cap bottles). MyPerfectColor is not using Cerakote paint.

The colors shown on this website are computer video simulations of the Cerakote Color and may not match Cerakote Color standards. Refer to Cerakote Publications to obtain the accurate color. Please know that MyPerfectColor is matching the original Cerakote color. If you intend to touch up paint that is old, know that your color has undoubtedly changed from the original due to exposure to light and age and the new paint may not match. You will achieve best results by re-coating the entire surface.

If you need more assistance, please feel free to contact us and one of our expert staff would be happy to help.

Frequently Asked Questions About Match of Cerakote™ Bright White H-140 *

Will MyPerfectColor Cerakote Bright White H-140 match an existing cured finish exactly?

MyPerfectColor matches Cerakote Bright White H-140 as a color reference, but an older cured part may still read differently from a fresh repair. Gloss, texture, age, cure, substrate, and batch variation can all change how the finish looks next to the existing part. If the area is highly visible or already weathered, compare against the actual part or an approved sample before ordering.

Can Cerakote Bright White H-140 be used for touch-up after transportation damage, installation damage, or missed spots?

Yes. A match of Cerakote Bright White H-140 is a practical match for touch-up after transportation damage, installation damage, fabrication damage, drilled holes, cut edges, handling marks, scratches, chips, rub marks, or missed spots in the original finish. MyPerfectColor precisely matches the color and finish, and it is available in touch-up paint and other formats for repair work on coated parts and fabricated components.

Can Cerakote Bright White H-140 be used on screw heads, trim plugs, clips, or other ancillary parts?

Yes. A match of Cerakote Bright White H-140 can be used on ancillary items such as screw heads, rivet heads, trim plugs, clips, end caps, covers, brackets, and similar hardware when those parts need to coordinate with a coated assembly. This is a good option for items that cannot go through the original coating process but still need close color coordination with the surrounding finish.

If I order a match of Cerakote Bright White H-140, will the liquid touch-up look the same as the cured finish?

Not always. Even when MyPerfectColor precisely matches the color and finish for Cerakote Bright White H-140, a fresh liquid touch-up can still look different beside the original cured finish. The installed part may have its own gloss, texture, film build, cure history, and age, so the safest expectation is a precise color-and-finish match to the reference, not a guarantee that the repair will disappear next to an older coated surface.

Should I use an existing part or sample to match Cerakote Bright White H-140 instead of the color code alone?

Yes, if the finish is highly visible or the tolerance is tight, an existing coated part or approved sample panel is often the better reference for Cerakote Bright White H-140. The color code is usually enough for coordination work and many replacement parts, but a real part is safer when the finish has texture, wear, or other visible effects that matter in the final match.

How quickly will I receive my paint matched to Cerakote Bright White H-140?
All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match Cerakote Bright White H-140 depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.
Can I use this as touch up paint for the Cerakote Bright White H-140 coating?

Yes, you can use the acrylic enamel paint as a touch up for the Cerakote Bright White H-140 coating. MyPerfectColor precisely matches the color and sheen of the official Cerakote color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

What type of paint is used to make touch up for the Cerakote Bright White H-140? And how much area will one can of spray paint cover?

To make touch up paint for the Cerakote Bright White H-140, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

Will the paint match both the color and the sheen of the original Cerakote Bright White H-140 coating?

MyPerfectColor acrylic enamel paint matching the Cerakote Bright White H-140 will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original Cerakote metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

How does MyPerfectColor match paint to the Cerakote Bright White H-140 color?

MyPerfectColor has the original Cerakote Bright White H-140 sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the Cerakote Bright White H-140 by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.

Do I need a primer for Cerakote Bright White H-140?
The need for primer for Cerakote Bright White H-140 depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.