Match of Duron™ 69-13 Forsythia *

Yes, but plastics vary a lot, so test the Duron 69-13 Forsythia match on the actual plastic before you commit to the full part. MyPerfectColor spray paint is designed to stick well to most plastics, but adhesion can still depend on the specific material, surface texture, and any mold release or contamination on the part.

For better results, clean the surface well and use MyPerfectColor primer for Acrylic Enamel when you need extra adhesion on difficult plastic. This is especially important for items like vents, trim pieces, covers, brackets, or other removable parts where a poor bond would be costly to redo.

Apply the Duron 69-13 Forsythia match in light, even coats rather than one heavy coat. Keep the can at a consistent distance, overlap each pass slightly, and move at a steady pace so the film builds evenly.

Heavy passes can cause runs, uneven sheen, or a muddy build that changes how the color reads on the finished item. This matters on small parts like hardware, grilles, pipe, shelves, or fixtures because spray technique can affect both coverage and final appearance.

Choose the finish based on how the part will be used and how you want the Duron 69-13 Forsythia match to read on the finished surface. Finish affects durability, reflectivity, cleanup, and how clearly the color shows on the item.

A glossier finish usually looks more reflective and can make surface texture more noticeable, while a lower-sheen finish can reduce reflection. If you are matching an existing piece, the sheen should be considered part of the match because the same color can look different in another finish.

For metal, start by cleaning off dust, oil, rust, and any loose contamination before applying the Duron 69-13 Forsythia match. If the surface already has paint, scuff it so the new coating can bond better, and make sure the old coating is sound before you paint over it.

Gloss, texture, and the condition of the existing coating can all affect how the new finish looks after spraying. If the metal has rust or the old coating is failing, address that first so the matched color has a stable base.

A match of Duron 69-13 Forsythia can look different after application because lighting, placement, sheen, and nearby surfaces all affect how the eye reads the color. The same matched coating can appear warmer, cooler, lighter, or darker depending on whether it is seen indoors, outdoors, in direct light, or beside other finished materials.

This is normal for any painted item, especially on large fixtures, removable parts, or surfaces that sit next to older coatings. For best planning, judge the finish in the actual location where the item will be used, not only from the color reference itself.

MyPerfectColor has an original sample of the Duron 69-13 Forsythia in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

MyPerfectColor offers custom spray paint matched to Duron 69-13 Forsythia which enables you to conveniently achieve a professional spray-smooth finish. It is difficult to gauge spray paint coverage because it depends on how you apply it and the amount of overspray, but generally the 11oz spray will cover about 20 square feet per coat.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. This paint sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

While MyPerfectColor can provide paint matched to the Duron 69-13 Forsythia, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.