Looking for color by Hex, RGB, CMYK, or Lab?

Match of IFS Coatings™ SRSL 82520 2604 Bone White *

Color Image

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

  • Image Code
  • HTML
  • URL
  • Direct Image Link
Copy below code in your post
Fast Shipping

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

A match of IFS Coatings SRSL 82520 2604 Bone White is a very light off-white with a soft warm cast and low chroma. It reads cleaner than a beige but less stark than a bright white, with a muted bone tone that stays close to the neutral side.

MyPerfectColor precisely matches the color and finish, which is useful for touch-up after transportation damage, installation damage, fabrication work, service marks, or missed spots in the original powder-coated finish. This shade can also be used on ancillary items and replacement parts such as screw heads, trim plugs, end caps, fastener covers, brackets, vent grilles, enclosures, and small fabricated details that need to coordinate with an existing coated assembly.

Because this is a very light color, it can show substrate contrast or show-through more easily if applied over a dark or uneven surface, so coverage on the first coat may not look as even as the final film. On an existing cured finish, gloss, texture, and film build can still make a repaired area read differently even when the color match is correct, so close side-by-side touch-up may call for a careful finish check. MyPerfectColor custom-matched paint is a practical way to match the color reference while keeping those finish variables in mind.

Similar colors:

ORSS84121CN MG White II
SRSF 80166 Super Wet White
PLSF 80007 /Ral 9001 Cream

Frequently Asked Questions About Match of IFS Coatings™ SRSL 82520 2604 Bone White *

Will MyPerfectColor match IFS Coatings SRSL 82520 2604 Bone White on an older cured finish exactly, or can the existing part still look different?

MyPerfectColor precisely matches the color and finish of IFS Coatings SRSL 82520 2604 Bone White, but an older cured part can still read differently next to fresh touch-up paint. Gloss, texture, age, weathering, cure, film build, and batch variation can all change how the finish looks in use. If the part is high visibility or already aged, compare against the actual part or an approved sample before you order.

Can I use IFS Coatings SRSL 82520 2604 Bone White for touch-up after transport damage, installation damage, or missed spots in the original finish?

Yes. This color is commonly ordered as MyPerfectColor touch-up paint for chips, scratches, rub marks, handling damage, transport damage, installation damage, fabrication damage, drilled holes, cut edges, field modifications, and missed spots in the original coating process. Choose the format that fits the repair area, and apply it only where close color and finish coordination is needed.

Can I paint screw heads, clips, trim plugs, or other hardware to match IFS Coatings SRSL 82520 2604 Bone White?

Yes. A match of IFS Coatings SRSL 82520 2604 Bone White is often used for ancillary parts that cannot go through the original coating process but still need to coordinate with the finished assembly. That can include screw heads, rivet heads, plastic snaps, trim plugs, end caps, clips, covers, brackets, and similar hardware. MyPerfectColor can supply a matched paint option for those small parts so they blend better with the surrounding finish.

If I order a liquid match for IFS Coatings SRSL 82520 2604 Bone White, will it look identical to the original cured finish?

Not always. Even when MyPerfectColor precisely matches IFS Coatings SRSL 82520 2604 Bone White, a fresh liquid touch-up can still look different beside an original cured finish because the coated part may have its own gloss, texture, cure, film build, or aging effects. This is especially important when you are comparing a repair spot to an existing powder-coated or coated surface. If exact side-by-side appearance is critical, test against the actual part or sample first.

What should I confirm before ordering a custom match for IFS Coatings SRSL 82520 2604 Bone White?

Confirm the exact brand color, the product type you need, the finish expectations, and the quantity before you buy. Custom-made color matches are not returnable or refundable, so it is best to verify IFS Coatings SRSL 82520 2604 Bone White against the part, sample, or reference you plan to match. Available in MyPerfectColor touch-up paint, custom spray paint, paint pens, and other formats for coated-finish touch-up and ancillary-part matching.

How quickly will I receive my paint matched to IFS Coatings SRSL 82520 2604 Bone White?
All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match IFS Coatings SRSL 82520 2604 Bone White depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.
Can I use this as touch up paint for the IFS Coatings SRSL 82520 2604 Bone White coating?

Yes, you can use the acrylic enamel paint as a touch up for the IFS Coatings SRSL 82520 2604 Bone White coating. MyPerfectColor precisely matches the color and sheen of the official IFS Coatings color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

What type of paint is used to make touch up for the IFS Coatings SRSL 82520 2604 Bone White? And how much area will one can of spray paint cover?

To make touch up paint for the IFS Coatings SRSL 82520 2604 Bone White, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

Will the paint match both the color and the sheen of the original IFS Coatings SRSL 82520 2604 Bone White coating?

MyPerfectColor acrylic enamel paint matching the IFS Coatings SRSL 82520 2604 Bone White will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original IFS Coatings metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

How does MyPerfectColor match paint to the IFS Coatings SRSL 82520 2604 Bone White color?

MyPerfectColor has the original IFS Coatings SRSL 82520 2604 Bone White sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the IFS Coatings SRSL 82520 2604 Bone White by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.

Do I need a primer for IFS Coatings SRSL 82520 2604 Bone White?
The need for primer for IFS Coatings SRSL 82520 2604 Bone White depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.