Looking for color by Hex, RGB, CMYK, or Lab?

Match of IFS Coatings™ PLSF 70216 / RAL 7024 Graphite Grey *

Color Image

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

  • Image Code
  • HTML
  • URL
  • Direct Image Link
Copy below code in your post
Fast Shipping

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

A match of IFS Coatings PLSF 70216 / RAL 7024 Graphite Grey is a dark, low-chroma grey with a cool, slightly blue cast. It reads as a restrained graphite tone rather than a warm charcoal, with enough depth to sit close to black without becoming fully black.

For touch-up after transportation damage, installation damage, fabrication work, field drilling, or missed spots in the original finish, MyPerfectColor precisely matches the color and finish for powder-coated frames, enclosures, brackets, railings, vent covers, screw heads, trim plugs, end caps, and other small ancillary parts. It is also a practical match for replacement parts, fabricated add-ons, and sample panels that need to coordinate with a known coating reference.

Because this is a dark color with a very low LRV, the condition of the substrate can affect the final read. Sanding marks, sharp repair edges, and heavy film build can stand out more than they would in a lighter grey, and gloss or texture differences between a fresh touch-up and a cured powder-coated surface may remain visible at close range.

MyPerfectColor custom-matched paint gives you a precise color-and-finish match, but it does not remove the normal differences created by age, cure, substrate, or surface prep on an existing coated part. For close repair work, the color reference is a strong starting point, while a weathered or approved existing part may be the better comparison when the finish tolerance is tight.

Similar colors:

PLSF 70122 / RAL 7015 Slate Grey
PLSF 70216 /Ral 7024 Graphite Grey
PLSF 70122 /Ral 7015 Slate Grey

Frequently Asked Questions About Match of IFS Coatings™ PLSF 70216 / RAL 7024 Graphite Grey *

Can MyPerfectColor match IFS Coatings PLSF 70216 / RAL 7024 Graphite Grey on an already cured coated part?

MyPerfectColor precisely matches the color and finish for IFS Coatings PLSF 70216 / RAL 7024 Graphite Grey, but an older or already cured part can still read differently next to fresh touch-up. Gloss, texture, age, weathering, cure, film build, and batch variation can all affect the final appearance. If the repair is highly visible, compare against an existing sample or the actual part before you order.

Is IFS Coatings PLSF 70216 / RAL 7024 Graphite Grey a good choice for touch-up after transportation or installation damage?

Yes. This color reference is commonly used for touch-up after transportation damage, installation damage, fabrication damage, field drilling, cutting, welding, handling marks, or missed spots in the original finish. Order the MyPerfectColor match in the format that fits the repair area, and prep the damaged spot so the new coating has a clean surface to bond to.

Can I use MyPerfectColor matched to IFS Coatings PLSF 70216 / RAL 7024 Graphite Grey on screw heads, clips, or trim plugs?

Yes. This reference is often used to coordinate ancillary items such as plastic snaps, screw heads, rivet heads, trim plugs, end caps, clips, covers, and small brackets that cannot go through the original coating process. A matched MyPerfectColor finish is useful when you need the small part to blend with the surrounding assembly, not when you need the original factory coating system itself.

Will a liquid touch-up matched to IFS Coatings PLSF 70216 / RAL 7024 Graphite Grey look the same as the cured powder-coated finish?

Not necessarily. Even when MyPerfectColor precisely matches the color and finish, a liquid touch-up can still look different beside a cured powder-coated finish because gloss, texture, film build, substrate, cure, and age all affect how the color reads. If exact side-by-side appearance matters, compare against the actual part or a retained sample before ordering.

What should I confirm before ordering MyPerfectColor for IFS Coatings PLSF 70216 / RAL 7024 Graphite Grey?

Confirm the exact color reference, the brand name, the finish expectation, the quantity, and the format you need before you order. Custom-matched colors are made to match the selected reference, so it is best to verify the part, sample, or code carefully first. Custom-made color matches are not returnable or refundable, so double-check the reference before purchase.

How quickly will I receive my paint matched to IFS Coatings PLSF 70216 / RAL 7024 Graphite Grey?
All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match IFS Coatings PLSF 70216 / RAL 7024 Graphite Grey depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.
Can I use this as touch up paint for the IFS Coatings PLSF 70216 / RAL 7024 Graphite Grey coating?

Yes, you can use the acrylic enamel paint as a touch up for the IFS Coatings PLSF 70216 / RAL 7024 Graphite Grey coating. MyPerfectColor precisely matches the color and sheen of the official IFS Coatings color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

What type of paint is used to make touch up for the IFS Coatings PLSF 70216 / RAL 7024 Graphite Grey? And how much area will one can of spray paint cover?

To make touch up paint for the IFS Coatings PLSF 70216 / RAL 7024 Graphite Grey, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

Will the paint match both the color and the sheen of the original IFS Coatings PLSF 70216 / RAL 7024 Graphite Grey coating?

MyPerfectColor acrylic enamel paint matching the IFS Coatings PLSF 70216 / RAL 7024 Graphite Grey will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original IFS Coatings metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

How does MyPerfectColor match paint to the IFS Coatings PLSF 70216 / RAL 7024 Graphite Grey color?

MyPerfectColor has the original IFS Coatings PLSF 70216 / RAL 7024 Graphite Grey sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the IFS Coatings PLSF 70216 / RAL 7024 Graphite Grey by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.

Do I need a primer for IFS Coatings PLSF 70216 / RAL 7024 Graphite Grey?
The need for primer for IFS Coatings PLSF 70216 / RAL 7024 Graphite Grey depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.