Looking for color by Hex, RGB, CMYK, or Lab?

Match of IFS Coatings™ PLSF 70474 / RAL 7002 Olive Gray *

Color Image

Actual color may vary from on-screen representation. Please view a physical color swatch or material sample to confirm your color choice prior to purchase.

  • Image Code
  • HTML
  • URL
  • Direct Image Link
Copy below code in your post
Fast Shipping

70% of Orders Ship within 3 Business Days.

Ready to purchase? Select your options in the 4 steps below.

Step 1: Select Paint Type / Application

Spray, OEM, Bottles and Pens

House and Wall Paint

Epoxy, Urethane, and Colorant Concentrate

This is a muted olive gray with a warm, earthy cast. The low chroma keeps it restrained rather than green, and the mid-dark value gives it a grounded industrial look instead of a light sage or tan.

MyPerfectColor custom spray paint in this match is useful for touch-up after transportation damage, installation damage, fabrication work, service marks, or missed spots on powder-coated parts. It can also be used on brackets, switch plates, end caps, screw heads, trim plugs, vents, enclosures, railings, and replacement hardware that need to coordinate with a coated assembly. Because the color is subdued, it works well for small visible details where the goal is to blend a paintable accessory into an existing finish rather than make it stand out.

At this depth and chroma, the color usually reads as a muted mid-dark neutral, but sheen, texture, substrate, and film build will still affect the final result. MyPerfectColor precisely matches the color and finish, which matters for touch-up and replacement parts, but a liquid repair beside an aged cured finish may still show a difference in gloss or surface texture. On darker or uneven substrates, repair edges and coverage transitions can become more noticeable than the color itself.

Similar colors:

PLSF 70474 /Ral 7002 Olive Gray
PLSF 70557 /Ral 7003 Moss Grey
PLSF 70557 / RAL 7003 Moss Grey

Frequently Asked Questions About Match of IFS Coatings™ PLSF 70474 / RAL 7002 Olive Gray *

Will MyPerfectColor match IFS Coatings PLSF 70474 / RAL 7002 Olive Gray exactly on an older cured part?

MyPerfectColor precisely matches the color and finish of IFS Coatings PLSF 70474 / RAL 7002 Olive Gray, but an older cured part can still read differently because gloss, texture, age, weathering, film build, substrate, and batch variation affect appearance. If you need a side-by-side repair on an existing part, compare against the actual part or an approved sample when possible. The color reference is the right ordering starting point, but it does not guarantee an invisible blend on a weathered finish.

Can I use MyPerfectColor for touch-up on IFS Coatings PLSF 70474 / RAL 7002 Olive Gray after transport damage, installation damage, or missed spots?

Yes. Use MyPerfectColor paint matched to IFS Coatings PLSF 70474 / RAL 7002 Olive Gray when you need to repair chips, scratches, rub marks, drilled holes, cut edges, fabrication damage, field modifications, shipping damage, installation damage, or missed spots in the original finish. It is meant as a touch-up color match, not as the original powder coating material. Available in touch-up paint, custom spray paint, paint pens, and other formats for repair work.

Can MyPerfectColor for IFS Coatings PLSF 70474 / RAL 7002 Olive Gray be used on screw heads, trim plugs, or other small ancillary parts?

Yes. If you need small parts to coordinate with IFS Coatings PLSF 70474 / RAL 7002 Olive Gray, MyPerfectColor can be used on items that cannot go through the original coating process, such as screw heads, rivet heads, trim plugs, end caps, clips, covers, brackets, and plastic snaps. The goal is close color coordination with the finished assembly. If the item will sit beside a cured coated surface, verify the visible tolerance before ordering a full quantity.

Will a liquid touch-up for IFS Coatings PLSF 70474 / RAL 7002 Olive Gray look the same as the factory coated finish?

MyPerfectColor precisely matches the color and finish of IFS Coatings PLSF 70474 / RAL 7002 Olive Gray, but a fresh liquid touch-up can still look different beside a cured factory finish because gloss, texture, film build, and cure behavior are not the same. That matters most on close-up comparisons and finish-sensitive surfaces. Use the color reference when you need a matched coating color for touch-up, sample panels, prototypes, or coordinated parts, but do not assume the repair will duplicate every detail of the original finish.

What prep should I use before applying MyPerfectColor to IFS Coatings PLSF 70474 / RAL 7002 Olive Gray on metal, plastic, or a previously coated part?

Start with a clean, dry, grease-free surface before applying MyPerfectColor to IFS Coatings PLSF 70474 / RAL 7002 Olive Gray. Light scuffing may help adhesion on sound existing coatings, but the right prep depends on the substrate and the condition of the surface. Use a primer when the material or existing coating requires it, especially on bare metal, plastic, or repaired areas with exposed substrate. If the part is important, test a small area first before coating the full part.

How quickly will I receive my paint matched to IFS Coatings PLSF 70474 / RAL 7002 Olive Gray?
All paint is custom-made to order. While most orders ship within 48 hours, the lead-time for paint made to match IFS Coatings PLSF 70474 / RAL 7002 Olive Gray depends on the type of paint needed. Interior and exterior house paints usually ship within 1 to 3 business days, while custom spray paint typically takes 3-5 business days to ship. The transit time depends on your location and the shipping method you choose. If your need is immediate, select Expedited Production during checkout. Most expedited production orders ship within 24 hours on business days. Please contact MyPerfectColor if you are concerned about a specific deadline. We do our best to make sure you get your paint on time. Learn more about paint lead times at MyPerfectColor.
Can I use this as touch up paint for the IFS Coatings PLSF 70474 / RAL 7002 Olive Gray coating?

Yes, you can use the acrylic enamel paint as a touch up for the IFS Coatings PLSF 70474 / RAL 7002 Olive Gray coating. MyPerfectColor precisely matches the color and sheen of the official IFS Coatings color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

What type of paint is used to make touch up for the IFS Coatings PLSF 70474 / RAL 7002 Olive Gray? And how much area will one can of spray paint cover?

To make touch up paint for the IFS Coatings PLSF 70474 / RAL 7002 Olive Gray, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

Will the paint match both the color and the sheen of the original IFS Coatings PLSF 70474 / RAL 7002 Olive Gray coating?

MyPerfectColor acrylic enamel paint matching the IFS Coatings PLSF 70474 / RAL 7002 Olive Gray will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original IFS Coatings metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

How does MyPerfectColor match paint to the IFS Coatings PLSF 70474 / RAL 7002 Olive Gray color?

MyPerfectColor has the original IFS Coatings PLSF 70474 / RAL 7002 Olive Gray sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the IFS Coatings PLSF 70474 / RAL 7002 Olive Gray by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.

Do I need a primer for IFS Coatings PLSF 70474 / RAL 7002 Olive Gray?
The need for primer for IFS Coatings PLSF 70474 / RAL 7002 Olive Gray depends on the type of paint, the substrate being painted and where it will be located. See our Primer Selection Table to see what primer you might need and learn more about when you might need a primer. Most people don't use a primer for a touch up paint application, but a primer may improve adhesion and is typically recommended for exterior applications.