Match of IFS Coatings™ PLSF 30114 / RAL 6006 *

MyPerfectColor precisely matches the color and finish of IFS Coatings PLSF 30114 / RAL 6006, but an older cured part can still read differently in the field. Gloss, texture, cure, age, weathering, substrate, and batch variation can all change how the finish looks beside a fresh repair.

If you need the safest comparison, match against the actual part or an approved sample panel rather than relying on the color name alone.

Yes. A match of IFS Coatings PLSF 30114 / RAL 6006 is a practical reference for touch-up after chips, scratches, rub marks, handling damage, transport damage, installation damage, fabrication damage, drilled holes, cut edges, or missed spots in the original finish.

MyPerfectColor can be ordered as a precise match of the color and finish so the repair can coordinate with the surrounding coated part. For a small repair, use the format that fits the damaged area; for a larger or more visible repair, verify the match against the actual part first.

Yes. A match of IFS Coatings PLSF 30114 / RAL 6006 is often used to coordinate ancillary items that cannot go through the original coating process, such as screw heads, rivet heads, clips, covers, trim plugs, end caps, brackets, and plastic snaps.

MyPerfectColor precisely matches the color and finish so these separate parts can blend with the surrounding coated assembly. For best results, make sure the substrate is paintable and that surface prep is appropriate for the material being coated.

Not always. Even when MyPerfectColor precisely matches the color and finish of IFS Coatings PLSF 30114 / RAL 6006, a fresh liquid touch-up can still look different next to an aged cured finish because of gloss, texture, film build, and the way light reflects off the part.

This matters most when you are repairing a visible area on an existing coated part. If the finish is highly visible or has texture or effect characteristics, compare against the actual part or a sample panel before ordering.

For repeat work, order by the exact brand color name and reference, in this case IFS Coatings PLSF 30114 / RAL 6006, and keep the same finish target for each part. Consistency improves when the substrate, surface prep, application method, and part condition are also kept as close as possible.

If some parts are new and others are already aged or weathered, expect the appearance to vary even when the color reference is correct. For the closest coordination, use the same reference and compare against the part you are trying to match.

Yes, you can use the acrylic enamel paint as a touch up for the IFS Coatings PLSF 30114 / RAL 6006 coating. MyPerfectColor precisely matches the color and sheen of the official IFS Coatings color sample. However, there may be some variation to your specific coating material due to aging, paint differences and application method. For ultra-critical matching requirements, you may consider having MyPerfectColor create a touch up solution precisely matching the color and sheen of your specific coating batch by sending us an actual part.

Learn more about our color matching services.

To make touch up paint for the IFS Coatings PLSF 30114 / RAL 6006, MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

MyPerfectColor offers two spray can sizes - 11oz net weight and 4.5oz net weight. The 11oz spray will cover about 20 square feet per coat. The smaller can, which is perfect for manufacturers who want to include a can with product shipments, will cover about 7 square feet.

MyPerfectColor acrylic enamel paint matching the IFS Coatings PLSF 30114 / RAL 6006 will match both the color and sheen. MyPerfectColor precisely matches the original coating to serve as touch up paint. MyPerfectColor is matching from original IFS Coatings metal swatches. There may be variation due to batch processes, aging and paint type differences. Learn more about touch up paint solutions.

MyPerfectColor has the original IFS Coatings PLSF 30114 / RAL 6006 sample in our color archive. We are able to make paint and verify that it matches the original.

Please note that there maybe differences between the color sample in our archive and your materials due to variation in manufacturing processes, aging, etc.

MyPerfectColor matches the IFS Coatings PLSF 30114 / RAL 6006 by scanning the sample with state of the art spectrophotometer and color matching software. The color match is refined through an iterative process to improve the match accuracy of both the color and sheen. MyPerfectColor has an extensive pigment library of over 100 different pigments that include organic and inorganic dispersions, aluminum, bronze and mica-based metallics and pearlescents, and fluorescent pigments. MyPerfectColor can achieve any sheen between flat and gloss. Note that difficult to match colors like metallics, pearlescents, and fluorescents will not match precisely - MyPerfectColor will get as close as possible, but the quality of these matches will not be as good due to the inherent limitations of matching these types of effect colors. Learn more about our color matching services.