Match of Duron™ 7676N Jungle Moss *

For a custom spray paint match of 7676N Jungle Moss, dry-to-touch can happen within minutes, but that is not the same as being ready for recoat or handling. Plan on recoating in about 1 to 2 hours, and allow about two weeks for full cure before heavy handling, stacking, or putting the part into service. If you need a specific workflow, apply light coats and let each coat flash off before the next one.

Yes, MyPerfectColor spray paint matched to 7676N Jungle Moss can be used on many plastic parts, but plastics vary a lot and some need different prep or primer to hold up well. Test on the actual plastic first if possible. For better adhesion, use the MyPerfectColor primer for Acrylic Enamel, especially on plastics or other low-energy surfaces where paint can be harder to anchor.

If you are working on a part that will flex, get handled often, or has an unknown plastic type, a test panel is the safest way to confirm adhesion before painting the full item.

Choose the finish based on how the part will be used, not just on the color name 7676N Jungle Moss. A flatter finish usually hides surface texture better, while a glossier finish is often easier to clean and can be more durable in service. The sheen also changes how the matched color reads after application, so the same 7676N Jungle Moss color can look different in matte, satin, semi-gloss, or gloss.

If the item will be touched often or cleaned often, choose the finish that fits that use first, then order the MyPerfectColor match of 7676N Jungle Moss in that finish.

Even when you order a correct MyPerfectColor match of 7676N Jungle Moss, the finished look can still change with lighting, viewing angle, sheen, and nearby surfaces. The same color can read differently on a flat panel than on a curved part, and daylight can make it look different than indoor lighting. Texture and substrate also affect how the color appears once it is sprayed.

If you are matching a part that will sit next to an existing painted surface, expect the final appearance to be influenced by the old finish, the new finish, and the environment where the item is viewed.

Before spraying a match of 7676N Jungle Moss on metal or an existing coating, clean the surface well, remove oil and contamination, and scuff any glossy areas so the paint has something to grab onto. If there is rust, loose paint, or failing coating, remove it before painting. The condition, gloss, and texture of the old surface can affect both adhesion and the final appearance.

If the metal is bare, previously coated, or in unknown condition, use primer where needed and test a small area first so you can confirm the finish and adhesion before painting the full part.

MyPerfectColor has an original sample of the Duron 7676N Jungle Moss in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

MyPerfectColor offers custom spray paint matched to Duron 7676N Jungle Moss which enables you to conveniently achieve a professional spray-smooth finish. It is difficult to gauge spray paint coverage because it depends on how you apply it and the amount of overspray, but generally the 11oz spray will cover about 20 square feet per coat.

MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. This paint sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

While MyPerfectColor can provide paint matched to the Duron 7676N Jungle Moss, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.