Match of Sherwin Williams™ 44225 *

Coverage depends on the size of the item, the surface texture, how well the substrate hides, the application method, and how many coats you need. As a planning rule, a typical can of spray paint covers about 20 square feet with one coat. Other MyPerfectColor paints typically cover between 400 and 600 square feet, but the practical amount for your project can vary with the surface and the finish you choose.

If you are coating a small part, fixture, or accessory in Sherwin Williams 44225, it is usually best to size the order based on the actual surface area and whether you expect to apply more than one coat for even coverage.

Yes, MyPerfectColor spray paint sticks well to most plastics, but plastics vary widely and some surfaces may need different prep or primer steps. If adhesion matters, test the paint on the actual plastic part first before painting the full item.

Using the MyPerfectColor primer can help improve adhesion on difficult plastic surfaces. That is especially useful for items like covers, housings, trim pieces, or other molded parts where surface behavior can differ from one plastic to another.

No. The same color code can read differently in matte versus gloss because the finish changes how light reflects off the surface and how deep the color appears after application. That means a match of Sherwin Williams 44225 in one finish may not look identical in another finish even though the color formula is intended to match the same reference.

If the finished item will sit next to other coated parts, choose the finish carefully so the overall look is consistent with the rest of the project.

Before applying MyPerfectColor paint matched to Sherwin Williams 44225 on metal or over an old coating, clean the surface well and remove rust, dirt, oil, and other contamination. Scuffing the surface can also help the new coating grip better.

Gloss, texture, and the condition of the existing coating can affect the final appearance of the new finish. If the old coating is failing, uneven, or contaminated, the result may not look uniform even when the color match itself is correct.

Choose the finish based on how the part will be used and how you want the coating to behave, not just on the color code itself. Finish affects durability, reflectivity, cleanup, and how the matched color reads on the finished item.

For Sherwin Williams 44225, a higher gloss will usually show more light reflection and can make the color appear different than a flatter finish. MyPerfectColor can supply the matched color in spray paint and other formats, so select the product and sheen that fit the surface and the job.

MyPerfectColor has an original sample of the Sherwin Williams 44225 in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams 44225. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams 44225, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.