Match of Sherwin Williams™ 37311 *

Yes. The key decision is the finish you choose for the item, because sheen changes how a match of Sherwin Williams 37311 reads after it is applied. Lower sheen finishes reduce reflectivity, while higher sheen finishes reflect more light and can make the color look a little different on the finished surface.

For ordering, think about the part you are painting and how it will be used. A sprayed fixture, trim piece, vent cover, or hardware part may need a different finish than a decorative item or a surface that will be handled often. MyPerfectColor supplies its own paint matched to Sherwin Williams 37311, so the finish choice is part of selecting the right product for your project.

Even when the color match is correct, Sherwin Williams 37311 can read differently after application because lighting, sheen, texture, and nearby surfaces all affect how the finished item looks. A part viewed indoors, outdoors, in shade, or under bright direct light can appear different even though the same match was used.

This matters most when the painted item sits next to an existing surface or is mounted in a fixed location. If you are coating a vent, cover plate, pipe, shutter, bracket, or other part that will be seen alongside another finish, expect the surrounding conditions to influence the final appearance. MyPerfectColor offers a match of Sherwin Williams 37311, but the installed result can still vary with placement and viewing conditions.

The Safety Data Sheet is tied to the MyPerfectColor paint product and chemistry, not to the Sherwin Williams 37311 color name by itself. To find it, use the MyPerfectColor Safety Data Sheets page for the product you are ordering.

If you are comparing products, make sure you are looking at the SDS for the specific MyPerfectColor format you plan to use, such as spray paint or another matched product type. The color reference alone does not determine the SDS.

Yes, but plastics vary widely, so the right prep matters. A match of Sherwin Williams 37311 can work on many plastic parts, but you should test on the actual material first because some plastics are harder to coat than others.

MyPerfectColor spray paint is intended to stick well to most plastics, and using the MyPerfectColor primer can improve adhesion. For plastic items such as covers, housings, trim pieces, or other molded parts, the safest approach is to prep the surface, use primer when needed, and test before finishing the full part.

Use light, even coats rather than one heavy pass. With a match of Sherwin Williams 37311, holding a consistent distance, overlapping each pass, and keeping the motion steady helps reduce runs, uneven sheen, and heavy film build.

This is especially important on small parts and detail items such as grilles, brackets, hardware, frames, or fixtures. Heavy application can make the color build look muddy or uneven, while multiple light coats usually give better control over the final appearance. If the surface is difficult or highly visible, testing a spray pattern first is a practical way to reduce risk.

MyPerfectColor has an original sample of the Sherwin Williams 37311 in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams 37311. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams 37311, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.