Match of Sherwin Williams™ 49894 *

Yes, but the surface condition matters. For metal, clean off dirt, oil, and any loose material, then address rust or corrosion before coating. For an existing painted surface, the old finish should be sound, clean, and scuff-sanded if it is glossy or slick so the new coating can adhere properly.

With Sherwin Williams 49894, the final appearance can change if the old coating has texture, wear, or a different sheen. If the substrate or previous finish is questionable, a test application on a small area is the safest way to check adhesion and appearance before coating the full item.

Choose the sheen based on how the item will be used and how much surface reflection you want. Lower sheens usually hide surface flaws better, while higher sheens are easier to wipe clean and can look more reflective. The sheen you choose also changes how Sherwin Williams 49894 reads on the finished item, even when the color formula is the same.

If the part will be handled often or needs easier cleanup, a more durable and washable finish may be the better choice. If you are matching a nearby surface, keep in mind that sheen differences can make the same color look noticeably different, so the color reference and finish should be selected together.

The Safety Data Sheet is tied to the specific MyPerfectColor product and chemistry, not to the Sherwin Williams 49894 color name by itself. To get the right SDS, check the MyPerfectColor product documentation for the item you are ordering.

For Sherwin Williams 49894, MyPerfectColor Safety Data Sheets can be found here: https://www.myperfectcolor.com/Safety-Data-Sheets/33970.htm

Before ordering, confirm the color reference, the MyPerfectColor product type, the sheen, and the quantity you need. A match of Sherwin Williams 49894 is a color reference, so make sure you are choosing the MyPerfectColor product matched to that reference and not expecting the original brand's paint line.

Custom-made color matches should be ordered carefully because they are not returnable or refundable. If the project is high risk, double-check the substrate, finish, and amount needed before you place the order.

For spray paint, dry-to-touch is usually within minutes, but that is not the same as being ready for full handling. A recoating window of one to two hours is a practical expectation, while full cure takes about two weeks.

If you are coating Sherwin Williams 49894 on a part that will be assembled, stacked, or handled soon after painting, allow for those separate stages. Dry-to-touch, recoat, and fully cured are different milestones, and handling too early can mark the finish even if it feels dry on the surface.

MyPerfectColor has an original sample of the Sherwin Williams 49894 in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams 49894. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams 49894, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.