Match of Sherwin Williams™ 50810 *

Apply Sherwin Williams 50810 in several light, even coats instead of one heavy pass. Keep the can moving, use a consistent distance, and overlap each pass slightly so the color builds uniformly. Heavy passes can cause runs, sagging, or a muddy-looking finish.

For the most even result, let each coat flash off before the next one and stop if the surface starts to look wet or overloaded. This matters most on small parts, trim pieces, and fixtures where uneven film build shows quickly.

Coverage depends on the part size, texture, hiding power, application method, and how many coats you need. As a general planning guide, a typical can of spray paint covers about 20 square feet with one coat. If the surface is rough, porous, or a darker color under Sherwin Williams 50810, plan on additional material.

For larger projects or multiple parts, count the total paintable area and add extra for test spraying and second coats. If you are coating small fixtures, hardware, or accessories, the number of parts and the amount of edge detail can matter as much as the square footage.

Yes. The code Sherwin Williams 50810 identifies the color target, but it does not define sheen. A flatter finish usually hides surface flaws better, while a glossier finish reflects more light and can make the matched color read differently on the finished item.

Choose the sheen based on the part's use, cleanup needs, and durability requirements. If you are matching a visible fixture, vent, or accessory, remember that the same color can look slightly different in matte, satin, or gloss because the reflectivity changes how your eye reads the color.

Yes, MyPerfectColor spray paint matched to Sherwin Williams 50810 can be used on many plastic parts, but plastics vary widely. Test on the actual material first because some plastics accept paint more easily than others and some need more prep to hold the coating well.

Clean the surface thoroughly, remove any release agents or oils, and use the MyPerfectColor primer for better adhesion when the substrate is difficult or low energy. A test panel or hidden area is the safest way to confirm that the finish bonds and looks right before you coat the full part.

Not always. Once Sherwin Williams 50810 is applied, lighting, sheen, texture, and nearby surfaces can change how the color reads. A match that looks right in the can or on a card can appear different after it is on the actual part.

If the item will sit next to an existing painted surface, evaluate it under the final lighting and on the real substrate. That is the best way to judge whether the finished piece meets your expectations before you coat the whole project.

MyPerfectColor has an original sample of the Sherwin Williams 50810 in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams 50810. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams 50810, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.