Match of Sherwin Williams™ 94898 *

Yes. MyPerfectColor can make a custom spray paint match of Sherwin Williams 94898 for small parts and hardware where spray application is practical, including switch covers, vents, knobs, speaker grilles, brackets, and trim pieces.

This is MyPerfectColor paint matched to the selected brand color reference, not Sherwin Williams original paint. For the best result, make sure the part is clean, properly prepped, and ready for a spray-applied finish.

No. The same color code can read differently after application depending on the finish, because matte and gloss reflect light in different ways.

If you are matching a nearby part or replacing a removable item, decide on the finish as part of the order. A finish change can make Sherwin Williams 94898 look lighter, deeper, or different in perceived depth even when the color formula is the same.

Coverage depends on the size of the part, surface texture, the color underneath, application method, and how many coats you need. A typical can of spray paint covers about 20 square feet with one coat.

For Sherwin Williams 94898, plan carefully if the item is textured, porous, or a different color underneath. Deep, vivid colors can sometimes need more coats for even coverage. If you are painting a larger area, remember that other MyPerfectColor paint formats typically cover 400 to 600 square feet, while spray paint is usually the better choice for small parts and fixtures.

Yes, Sherwin Williams 94898 can be ordered as MyPerfectColor spray paint for many plastic parts, but plastics vary a lot and some are harder to coat than others.

Testing on the actual plastic is important. MyPerfectColor spray paint sticks well to most plastics, but using the MyPerfectColor primer for Acrylic Enamel can improve adhesion, especially on difficult or low-energy surfaces. If the part is important, do a test piece first so you can confirm prep and adhesion before coating the final item.

MyPerfectColor spray paint matched to Sherwin Williams 94898 is dry to the touch within minutes, should be recoated in 1 to 2 hours, and is fully cured in about 2 weeks.

These are different stages. Dry to the touch does not mean ready for hard use, so if the part will be handled often, allow the full cure time whenever possible before putting it into service.

MyPerfectColor has an original sample of the Sherwin Williams 94898 in its color archive. This enables us to make paint and verify that it matches the original.

Please note that if your material is not new then the paint may not work for touch up as your material has aged and is likely different than it was when new. Learn more about our color matching accuracy. If you need a touch up application, send us a part and we can create a touch up solution precisely matching the current color and sheen of your specific materials.

Learn more about our color matching service.

To make spray paint matched to Sherwin Williams 94898. MyPerfectColor uses an acrylic enamel which is a fast-drying durable coating suitable for interior or exterior use. MyPerfectColor custom spray paint enables you to conveniently achieve a professional spray-smooth finish in any color in any sheen. It sticks well to most surfaces including metal, plastics, powder-coatings, cabinets and primed or previously painted wood.

The 11oz spray will cover about 20 square feet per coat. Keep in mind that it is difficult to gauge how much spray you'll need as it is highly dependent on how it is applied. It is better to have too much than run short.

While MyPerfectColor can provide paint matched to the Sherwin Williams 94898, we don't provide any crossover information because this is a subjective determination. Every paint company offers its own unique selection of colors and rarely does a color have an exact equivalent in another company's color collection, so determining which color is the best approximation is a judgement call.

However, under the color image on a color page there is a link that says "Explore Related Colors". Clicking this link displays colors with similar values and you can look for any colors from the company you want.

Keep in mind that this just shows similar colors based on the color values we have stored in our database. It doesn't mean it is the same or give any approximation about how close the color is. You can play around with the Hue, Lightness and Chroma sliders to expand the selection.